• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Motorola Saber II Programing Help

Status
Not open for further replies.

Krookedatmosphere

Member
Premium Subscriber
Joined
Dec 31, 2007
Messages
0
Location
Brampton
Hello

I am looking for someone in the Toronto or Brampton area to help program my Motorola Saber II UHF radios .. with the FRS/GMRS channels please..

I have it programmed now but its missing channels 13 and up..

I need any help please. I would like to learn to do it myself I have a 486 computer and just need software to program them.

anyone in the GTA, Toronto, Peel area please let me know asap
thanks
Brayden
 

JnglMassiv

Member
Joined
Mar 2, 2004
Messages
853
Location
Chicago / 016
Krookedatmosphere said:
I would like to learn to do it myself I have a 486 computer and just need software to program them.
I'm not local to you but you'd need a RIB and cable in addition to the slow PC and software. Become familiar with the concepts and equipment in this document:
http://www.batlabs.com/newbie.html

Saber 2's can be programmed for either 48 or 120 channels, depending on what you have (The 4k vs 8k version). You'd have to assign several zones to use more than 12 channels.
 
Status
Not open for further replies.
Top