OHIOSCAN
Member
Anybody using multiple Line-In SC or Mixers, would like one USB SC or mixer setup to record at least 2-3 scanners. Using mix of SC and USB line-in dongles would like to find one easier to use setup.
Thanks
Mike
Thanks
Mike
Could you use something like this then put two mono scanner inputs into each left and right stereo input?
Amazon.com: Behringer Q502USB 5-Channel Mixer: Musical Instruments
Yes that's kind of what I have been looking at, but almost all those kind of mixers use RCA plugs. I was hoping to find some kind of I/O device that worked with 3.5 mm. I have not seen anything like that out there for sale. I will probably have to do something like that mixer with adapters. really want to find something like a multi-I/O soundcard.
thanks for the heads up.
Mike
I am not really sure that you are going to find much suitable. What it sounds like you are looking for is multiple sound cards in one package. Take a look at this: http://www.califone.com/pdf/spec_sheets/1216USB_Spec.pdf
I have no idea if it will do what you may want it to.
Have you considered a powered usb hub with several usb sound cards plugged in? If you get cards that plug in directly, it could eliminate some cables...
That Califone device looks like what I am looking for, good catch. I run a powered hub now with three USB I/O dongles on 2 PC's. My biggest issues always seems to be Win sound management control . Get everything working then have to reboot for some reason and everything goes to hell. (gr)
Thanks MIke
Get RTL-SDR dongles. About $10 each.
About RTL-SDR - rtl-sdr.com
I'm using just 1 to stream 4 stations.
Everything is P-25 I am recording and I still have not had much luck with DSD+, that would be a neat setup,any examples of your setup online?e