My 2009 Honda Accord install
- Thread starter nosoup4u
- Start date
- Status
I think I found the instructions on one of the Honda forums. I should have bookmarked it because at some point I am going to have to put it back.
I think there are 2 screws inside the center console you need to take out, from there you can pry a screw driver along the edges and it pretty much snaps out. There were also a couple screws in the cubble hole that need to come out as well.
I used the RH96 bracket, no DIN sleeve. I used heavy wire ties to attach the bracket to the metal mount, mine kept flopping down, so I also have an 6 inch bungie chord which you really can't see that keeps the radio from moving around.
I think there are 2 screws inside the center console you need to take out, from there you can pry a screw driver along the edges and it pretty much snaps out. There were also a couple screws in the cubble hole that need to come out as well.
I used the RH96 bracket, no DIN sleeve. I used heavy wire ties to attach the bracket to the metal mount, mine kept flopping down, so I also have an 6 inch bungie chord which you really can't see that keeps the radio from moving around.
I’m going to have someone help me this coming Monday, to try and do this same kind of install of my 536 into my 2010 Accord. As I posted earlier, already have the Larsen tri-band antenna, which seems to be working very well, even for CHP.
- Status
