Here's my shack that I built fully myself. The desk on the left I built, the rack and the scanner bracket on the bottom was custom built.
From left to right in the first picture:
Compaq Presario CQ60
Radio Shack Pro-164
Motorola MT-1000 "Personal Use"
GE MPA "Personal UHF Channels"
Top To Bottom On My Rack:
Motorola MaxTrac 300 "Listen to PA Turnpike and Personal VHF"
Motorola Moxy "Personal UHF"
Kenwood Power Supply "For Both Radios, I only use one at a time!"
Realistic Pro - 2020 "Chester County, Lancaster County, HAM"
Motorola Minitor with Amplified Charger
Custom Portable Scanner Mount On Bottom Of Rack:
Radio Shack Pro - 135
Behind the Pro - 135:
Kenwood TK-320 UHF "Explorer Post Channels"
The Right Desk:
Motorola Minitor III "Chester County Station 87"
Antenna: "I cut one side off of a piece of angle iron and mounted the antenna to it, It is screwed onto the window sash"
Radio Shack Scanner Antenna
Yagi Antenna that is older than I am "Not Pictured"
This is all soon to change because im going to take my HAM test on saturday so that means MORE RADIOS!!!!
From left to right in the first picture:
Compaq Presario CQ60
Radio Shack Pro-164
Motorola MT-1000 "Personal Use"
GE MPA "Personal UHF Channels"
Top To Bottom On My Rack:
Motorola MaxTrac 300 "Listen to PA Turnpike and Personal VHF"
Motorola Moxy "Personal UHF"
Kenwood Power Supply "For Both Radios, I only use one at a time!"
Realistic Pro - 2020 "Chester County, Lancaster County, HAM"
Motorola Minitor with Amplified Charger
Custom Portable Scanner Mount On Bottom Of Rack:
Radio Shack Pro - 135
Behind the Pro - 135:
Kenwood TK-320 UHF "Explorer Post Channels"
The Right Desk:
Motorola Minitor III "Chester County Station 87"
Antenna: "I cut one side off of a piece of angle iron and mounted the antenna to it, It is screwed onto the window sash"
Radio Shack Scanner Antenna
Yagi Antenna that is older than I am "Not Pictured"
This is all soon to change because im going to take my HAM test on saturday so that means MORE RADIOS!!!!