I need help guys I'm trying to program my station tones On my kenwood tk-290 kpg-38d please help. Feel free to email me at bleas@rmctc.org thank you.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Need help tk-290 2tone is not working
- Thread starter Mickey15
- Start date
fire_master_21
Member
You would be better off posting here, rather than asking for an email. Plenty of people who can help.
Mickey, you have several threads going here all over the place. I tried to work with you via email.
Do you have the tones for the station you are trying to monitor? You never got back to me on that email.
Also when I told you about pressing "F-1" also know as the HELP button, you got stumped and puzzled.
forums.radioreference.com
What do u mean by this.
Can always hit F1 (help) to read its function.
On Thu, Dec 7, 2023, 10:03 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
No clue what tones you need to enter, have to ask the local radio shop that question.
On Thu, Dec 7, 2023, 4:50 AM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, thanks. Where can I find the Tone at
On Thu, Dec 7, 2023, 12:44 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
Shouldn't have to.
Can always hit F1 (help) to read its function.
On Wed, Dec 6, 2023, 9:55 PM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, and how about the group edit? Do I have to do anything to that or no.
Do you have the tones for the station you are trying to monitor? You never got back to me on that email.
Also when I told you about pressing "F-1" also know as the HELP button, you got stumped and puzzled.
Tk-290 kpg-38D 2-tone alerting not working
I tried searching the threads for an answer to this question with no luck. Apologies if this has been answered before. I just bought a TK-290 and the KPG-38D software. When I was a volly at a rural ambulance service, we had a page channel that would only open the channel after a 2-tone alert...
What do u mean by this.
Can always hit F1 (help) to read its function.
On Thu, Dec 7, 2023, 10:03 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
No clue what tones you need to enter, have to ask the local radio shop that question.
On Thu, Dec 7, 2023, 4:50 AM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, thanks. Where can I find the Tone at
On Thu, Dec 7, 2023, 12:44 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
Shouldn't have to.
Can always hit F1 (help) to read its function.
On Wed, Dec 6, 2023, 9:55 PM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, and how about the group edit? Do I have to do anything to that or no.
Can you call me at 484-219-0729Mickey, you have several threads going here all over the place. I tried to work with you via email.
Do you have the tones for the station you are trying to monitor? You never got back to me on that email.
Also when I told you about pressing "F-1" also know as the HELP button, you got stumped and puzzled.
Tk-290 kpg-38D 2-tone alerting not working
I tried searching the threads for an answer to this question with no luck. Apologies if this has been answered before. I just bought a TK-290 and the KPG-38D software. When I was a volly at a rural ambulance service, we had a page channel that would only open the channel after a 2-tone alert...
What do u mean by this.
Can always hit F1 (help) to read its function.
On Thu, Dec 7, 2023, 10:03 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
No clue what tones you need to enter, have to ask the local radio shop that question.
On Thu, Dec 7, 2023, 4:50 AM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, thanks. Where can I find the Tone at
On Thu, Dec 7, 2023, 12:44 AM Evans Mitchell <kd4efm1@gmail.com> wrote:
Shouldn't have to.
Can always hit F1 (help) to read its function.
On Wed, Dec 6, 2023, 9:55 PM Leas, Bradley <bleas@rmctc.org> wrote:
Ok, and how about the group edit? Do I have to do anything to that or no.
