Need Help: TRX-1 Programming

[Ubbe]

Using a paper clip instead of a proper antenna can be the difference that the attenuator setting are doing, and then you can set the attenuator only to those simulcast systems that doesn't seem to be received and keep full reception on the rest of the systems.

/Ubbe

 

[Patrolman714]

In a surprising update - I updated my second TRX-1 and copied the Horry County Configuration to it, and, It Works! It scans with the OEM and 800Mhz antennas attached. The configuration includes all of the Simulcast Scanner Settings that were suggested in this thread. Now, I am wondering what is going on with the TRX-1 that doesn't scan this system. Any suggestions?

 

[pyeman99]

In a surprising update - I updated my second TRX-1 and copied the Horry County Configuration to it, and, It Works! It scans with the OEM and 800Mhz antennas attached. The configuration includes all of the Simulcast Scanner Settings that were suggested in this thread. Now, I am wondering what is going on with the TRX-1 that doesn't scan this system. Any suggestions?

Swap the SD cards & see what happens.

 

[Patrolman714]

Swap the SD cards & see what happens.

I swapped SD cards from the working TRX-1 to the troublesome one and it did not work. Swapped the cards back, and the working one still works. What would this mean? And is there a fix?

 

[pyeman99]

In the trx that appears not to work re load the firmware via EZ scan.

 

[Patrolman714]

In the trx that appears not to work re load the firmware via EZ scan.

That Worked! Thank You!