needing help with problem...

[car2back]

OT, I know.... but I need some help

I programmed the Tulsa TRS in on my new UBC-3300; it is trunking fine, It shows it's recieving a strong signal (traveling through West Tulsa), but when it stops on a Talkgroup, there is no audio. I confirmed it is trunking correctly to the right freqs. by comparing it with my BC785...

audio is fine for conventional freqs
any ideas on what the problem might be?

thanks...

 

[OldHick]

You have the export version?

Type: HF/VHF/UHF receiver/scanner
Frequency range: 25-512 / 806-960 / 1240-1300 MHz
5/6.25/7.5/8.33/10/12.5/20/25/50/100 kHz
Mode: AM/FM/WFM
Other: Trunktracker III (EDACS, Motorola & E.F.Johnson)
1000 memories in 10 banks/100 ch/s. CTCSS/DCS. Alpha tags.
APCO-25 digital option. PC-programmable


Does it require NFM mode like the US model?

400.0000 - 512.0000 NFM 12.5
806.0000 - 823.9875 NFM 12.5
849.0125 - 868.9875 NFM 12.5
894.0125 - 956.0000 NFM 12.5
1240.0000 - 1300.0000 NFM 12.5

 

[car2back]

You have the export version?

Yes, thats the one.

Does it require NFM mode like the US model?

400.0000 - 512.0000 NFM 12.5
806.0000 - 823.9875 NFM 12.5
849.0125 - 868.9875 NFM 12.5
894.0125 - 956.0000 NFM 12.5
1240.0000 - 1300.0000 NFM 12.5

It defaults to NFM on 800mhz..... not sure what you are asking..

 

[car2back]

*** I fixed it: I programed all the site freqs in and switched it off of 'Control Channel only'. weird.

 

[OldHick]

I was looking at the specs online

Type: HF/VHF/UHF receiver/scanner
Frequency range: 25-512 / 806-960 / 1240-1300 MHz
5/6.25/7.5/8.33/10/12.5/20/25/50/100 kHz
Mode: AM/FM/WFM <<<<------------------------------------------------- I didn't see NFM listed
Other: Trunktracker III (EDACS, Motorola & E.F.Johnson)
1000 memories in 10 banks/100 ch/s. CTCSS/DCS. Alpha tags.
APCO-25 digital option. PC-programmable