belvdr
No longer interested in living
- Joined
- Aug 2, 2013
- Messages
- 2,567
I was able to go from 1.33 to 1.35 without issue.
Also, Unication has no release notes for 1.35.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
New Firmware - 1.35
- Thread starter belvdr
- Start date
Also, Unication has no release notes for 1.35.
Yes. I just filled out the form and asked for the current FW release.
Any one else having an issue when the pager goes out of range it will not automatically come back in range unless you cycle the power. I had my pager on me and went into my basement pager went out of range as expected but when I came back upstairs the pager never went back in range and I had to power cycle to get the pager back in range. I've experienced this with 1.34 and now 1.35 firmwares.
What is your signal strength upstairs?
Signal strength is greater than -90
belvdr
No longer interested in living
- Joined
- Aug 2, 2013
- Messages
- 2,567
I’ve seen this when using PPS 4. There’s a thread on it somewhere.
Issues with systems coming back in range after using PPS V4
I've noticed my VHF G5 is not reacquiring systems that go out of range. I've tested it with my local system side by side with my other UHF G5, which I haven't programed with V4 yet, and the VHF G5 does not reacquire my local system when I remove the antenna and put it back on, but the UHF G5...
