Very possible. The operational functions would match the conversations.
New Jersey Interoperability Communication System (NJICS)
- Thread starter etr37
- Start date
Very possible. The operational functions would match the conversations.
- Joined
- Dec 22, 2005
- Messages
- 2,222
- Reaction score
- 1,237
This a State of New Jersey agency, appointments are made by the State.
RID range would make sense for PVSC then.
theunnamedispatcher
Newbie
- Joined
- Dec 30, 2025
- Messages
- 2
- Reaction score
- -9
I can confirm as I am a dispatcher for Union County. We had to Patch UCF9 with BH UFH due to a new tower coming up and test.
- Joined
- Dec 22, 2005
- Messages
- 2,222
- Reaction score
- 1,237
Thanks for that. Springfield occupies FG 9 for sometime. FG10 and FG1 were the only unused of the FG group. BH on 10. FG1 now remains largely unused. New sub- site been on the air from monopole at high school for a while.
AC2OY
Member
Hi guys !! Its been a while..I only have one question? The Newark Police Department migrated here but does the TE mean what I think it means??!! Like I stated I'm a tad rusty and I read that some people here stated that they would eventually go encrypted.
The Newark PD are encrypted. I dont think they are on NJICS. But, yes, the analog frequencies are gone.
hey all,
So I just bought the uniden bcd325p2. I live in Salem county and they just switched to phase 2. the scanner works well for their system, but for the NJICS system is where I have a problem. even when right near a tower it tells me "finding control channel". from my research I've come to the conclusion that the bcd325p2 isn't good for multiple site simulcasting. (forgive me if it's not the correct terminology)
so my question is for a everyone who has the bcd536hp or the sds100, which would be the best to listen to the NJICS system.
thank you all in advance for any and all help on the matter
So I just bought the uniden bcd325p2. I live in Salem county and they just switched to phase 2. the scanner works well for their system, but for the NJICS system is where I have a problem. even when right near a tower it tells me "finding control channel". from my research I've come to the conclusion that the bcd325p2 isn't good for multiple site simulcasting. (forgive me if it's not the correct terminology)
so my question is for a everyone who has the bcd536hp or the sds100, which would be the best to listen to the NJICS system.
thank you all in advance for any and all help on the matter
If you are trying to listen to a simulcast location then you will need the SDS 100. The NJICS is a hybrid of single tower and simulcast sites.
thank you very much
- Joined
- May 17, 2025
- Messages
- 139
- Reaction score
- 201
To add to this comment, any SDS series scanner should perform well on NJICS. The other option is to isolate the nearest tower using a directional (yagi) antenna if you want to try and make your current scanner work. The drawback to that is you really wouldn't be able move the scanner or listen to other systems in different directions.
Years ago I brought my then new Uniden 325P2 to Atlanta on a trip in which I was staying in an upper floor room with a great view. I wasn't familiar with the simulcast issues and couldn't understand with the scanner wouldn't lock onto a control channel for the City of Atlanta P25p2 system. After a number of failed reprograms and double checks I did some searching and learned about simulcast issues. I finally picked up some transmissions on the system by placing the scanner in the bathroom sink with the antenna stuck down the drain.
Uniden SDS scanners work great on the NJICS, and on all other P25p2 systems I've monitored.
