BC125AT: New program BC125AT

SharonLDurham

Member
Joined
Mar 21, 2026
Messages
8
Reaction score
0
I have a new uniden BC125AT why is the screen having a glitch in the screen writing? How do I unlock it? How do I program it for a Nascar Race?
 

Attachments

  • 20260321_115342.jpg
    20260321_115342.jpg
    36.9 KB · Views: 38

Whiskey3JMC

Quiet numbskulls I'm broadcasting!
Premium Subscriber
Joined
Jul 16, 2006
Messages
10,174
Reaction score
8,888
Location
Simulcastylvania, TE
Welcome to the RR forums. You can either program a BC125AT by hand (start on page 37 of the manual) or by using software like Proscan. Expect a bit of a learning curve if you have little to no experience programming scanners but plenty of resources at your disposal right here on the Uniden forums.
 

SharonLDurham

Member
Joined
Mar 21, 2026
Messages
8
Reaction score
0
Welcome to the RR forums. You can either program a BC125AT by hand (start on page 37 of the manual) or by using software like Proscan. Expect a bit of a learning curve if you have little to no experience programming scanners but plenty of resources at your disposal right here on the Uniden forums.
Thank You Sharon! My main problem is that it is new with a glitch in the writing on main screen would like to fix that and get it working before Nascar race.
 

murphcc1

Member
Premium Subscriber
Joined
Apr 22, 2005
Messages
118
Reaction score
146
Another programming software I use is ......https://www.butel.nl/products/arc125/arc125.html
 

D31245

Member
Premium Subscriber
Joined
Dec 11, 2023
Messages
337
Reaction score
389
Location
FN42
Have you tried a reset?

To reset the Uniden BC125AT, turn off the scanner, then press and hold the 2, 9, and HOLD keys while turning the scanner back on. This will clear all data and return the scanner to its initial settings.

I also use the Unden software program my BC125AT. Works fine.
 
  • Like
Reactions: wtp

SharonLDurham

Member
Joined
Mar 21, 2026
Messages
8
Reaction score
0
I have i am all good other then a glitch in the screen where you see the writing. I need some one local to program mine.
 

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
25,888
Reaction score
2,573
Location
Bowie, Md.
ummm...unless I'm reading that display wrong, it says 'charging'....guess what that means?

MIke
 

wtp

Member
Joined
Apr 3, 2008
Messages
7,278
Reaction score
3,006
Location
Port Charlotte FL
sent it as a PM also.
i thought i was here...this is for any others
Adjusting the Contrast
This submenu of the Display/Charge menu controls the display’s contrast (how light or dark it appears) for different viewing conditions. There are 15 contrast settings. You see the contrast change as you scroll through the settings.
1. To adjust the contrast, press Func then ; the Display/ Charge menu displays
2. Scroll to Set Contrast and press Pgm/E.
3. Scroll to see the contrast settings.
4. When you have selected a setting, press Pgm/E to set it and return to the previous menu.
5. Press . Clr to exit.

and many here like proscan
there is a free trial
 
Top