Yes sorry, not sure why I put 7800 unless I fat fingered it. I would like to give my business to a recommended dealer. Can you email me at jtr8151@gmail.com
73s
KM4SIC
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
NX-5000 Series, Q&A, Info, and details
- Thread starter kd4efm
- Start date
- Status
Yes sorry, not sure why I put 7800 unless I fat fingered it. I would like to give my business to a recommended dealer. Can you email me at jtr8151@gmail.com
73s
KM4SIC
If anyone is at IWCE tomorrow and swings by their booth, can you please check on this. Looking for a fix for this as well to limit the squawwwwkkkk to a blip, similar to DOS mute with Motorola gear.
Sent from my iPhone using Tapatalk
Shows the main deck info, and 1,2,or 3 on the left side
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
By the way, you can go to kenwood website and under the nx5000 information page, it shows what each head looks like .
Sent from my SM-G965U using Tapatalk
Did Kenwood ever fix the DOS mute for MDC-1200 so you only hear a blip and not the full squaaaakkk ? And did they fix the DMR scan issue stopping on a slot regardless of the programmed talkgroup ?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
New update due soon updates the dmr.
End of transmission dos. No.
Sent from my SM-G965U using Tapatalk
End of transmission dos. No.
Sent from my SM-G965U using Tapatalk
Last edited:
Is there anyone we can call to emphasize on the MDC issue? It is really annoying.
Sent from my iPhone using Tapatalk
We talked about it already, I will call again and try to get something but it then becomes a patent issue. Tell Motorola to end the EOT mdc and use only BOT.
Sent from my SM-G965U using Tapatalk
I hear ya. It is what it is.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
5.21 is on the site, still waiting for 5.3, it will have bluetooth 4.0, and fixes.
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
I am still getting most of the MDC burst and we only use BOT. I very rarely get a muted MDC burst. Plus, some departments strictly use EOT, so there is a definite need.
Yes you buy P25 and DMR and turn off NXDN
SOFA_KING
Member
I have been thinking of a workable solution for multi-mode, multi-band in my work vehicle. I'm considering an NX-5XXX stack, but I'm wanting THREE digital modes plus analog. I keep checking back here with some hope of good news.
Will Kenwood ever produce an update...or a radio line...that can do them all? Analog, P25, NXDN and DMR???
If not, why? Seems like what most people here want.
Phil
The radios can't handle it, is the word. However, if you are doing a multi-deck stack you could do it - one radio could have whatever 2 digital modes it needs for that band and another could have whatever digital modes it needs for its band. And I believe you can get two, say, VHF decks which would cover all modes.
Contact Evans KD4EFM on here as he can clarify and help you if you decide to purchase.
SOFA_KING
Member
Thank you, Mark. That is something to think about. Hmmmm.
And yes, Evans is a good dude. I've talked to him on the radio many times in Florida when I would visit the Lakeland area for work related stuff...or on DMR Florida Statewide.
Phil
Does anyone have the price list for the basic remote head KRK-14H separation kit and KCT-71 cable in 17 feet? I appreciate your help!
Mike
Mike
- Status
