• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

NX 5200 Password to Programming

D

DO5MP

Member
Premium Subscriber
Joined
Aug 4, 2022
Messages
12
Location
KiLa,Germany
Unfortunately I have forgotten the password for my NX-5200, I wanted to continue programming it today, but now it wants a password so that I can read it out.
Is there any way to get the password?
Thanks a lot
 
kd4efm

kd4efm

Member
Premium Subscriber
Joined
Jul 14, 2002
Messages
2,903
Location
EL98 Florida
1, did you happen to save your codeplug after you wrote it?
2, open your last saved code plug. check the password entry box for length of the password, if you only did a READ PWD, then clear it and write to the radio. If you did a read/write password, all you can is write till you find the correct combo.
3, all else fails, send to your dealer in the EU, to have the radio blanked.
 
You must log in or register to reply here.

Similar threads

Baker845
Kenwood Nx-5200 question
Replies
2
Views
243
Baker845
Baker845
D
NX-P1200AVK is there a way to program 2M HAM frequencies?
Replies
6
Views
471
dryfb
dryfb
I
Two Transceivers w/one KCH-20R - Bluetooth Programming Possible?
Replies
2
Views
245
intermod
I
J
Can you help me get BCFY Shell from Raspberry Pi image to run?
Replies
2
Views
334
jmcguiga
J
LowderK
Tytera Tyt md-uv380 password locked
Replies
0
Views
177
LowderK
LowderK
Top