One freq, ham DMR? BCD996P2

[dkcorlfla]

Hi all, I seem to be stuck on trying to program a one frequency ham UHF DMR repeater into my BCD996P2.

I tried ARC-XT Programing DMR non-trunked Freq

And also direct entry on the scanner with no luck. If I program the scanner as conventional I'm not able to enter the slot number.

If I enter as a one frequency DMR I see no entry for the frequency.

The repeater I'm trying to enter is: Orlando 443.16250 W4MCO Florida Repeater

ARC XT Pro Ver 2.3 Build 2 or direct entry on the scanner.

Thanks

 

[dkcorlfla]

Sort of figured it out. From the scanner not ARC XT goes something like this:

Program System > New System > New Site > New Group > New channel > TGID

Somewhere in there was one freq DMR and the CC and the slots.

I will download the file from the scanner to the ARC XT software and see if the software can do it too.

If not I will go back to the scanner, do it again and make lots of notes.

I have it working now on the Ham DMR repeater so it's time for a break.