I'm trying to create a channel configuration for a Tier II DMR channel using OP25 (Boatbod fork).
I'm not getting any audio but it seems I am getting sync (looking on the sterr.2 file, see attached).
This is what I'm writing on the terminal:
I attached the configuartion file (.json) down below.
I'm not getting any audio but it seems I am getting sync (looking on the sterr.2 file, see attached).
This is what I'm writing on the terminal:
Code:
./multi_rx.py -v 10 -c dmr_channel_test.json 2> stderr.2
./audio.py -u 23466
I attached the configuartion file (.json) down below.
JSON:
{
"channels": [
{
"device": "rtl_0",
"demod_type": "fsk4",
"destination": "",
"excess_bw": 0.2,
"filter_type": "rrc",
"if_rate": 24000,
"name": "VC",
"plot": "fft",
"symbol_rate": 4800
}
],
"devices": [
{
"args": "rtl=0",
"frequency": 447625000,
"gains": "LNA:39",
"name": "rtl_0",
"offset": 0,
"ppm": 0,
"rate": 2400000,
"tunable": true
}
],
"trunking": {
"module": "tk_trbo.py",
"chans": [
{
"lcn": 1,
"frequency": 447625000,
"cc": 1
}
]
},
"terminal": {
"module": "terminal.py",
"terminal_type": "curses",
"#terminal_type": "http:127.0.0.1:8080",
"terminal_timeout": 5.0,
"curses_plot_interval": 0.1,
"http_plot_interval": 1.0,
"http_plot_directory": "../www/images",
"tuning_step_large": 1200,
"tuning_step_small": 100
}
}