Possible EDACS Trunking System UT/WY

[enosjones]

Hi I am From Utah and was Wondering if anyone Could Check out A new System. The one Tower Is In Emery County, Utah The Others Are In Wyoming. The Company Seems To Be Based In Wyoming. I Need Some Info Confirmed Or Double Checked. I'm Thinking Its An EDACS System But I'm Not Sure, I am Not As Familiar With EDACS as I am The Motorola 2 Type Systems. So I am Not Sure of Which Format To Use in My 396T Scanner. Here is the Info I Have....

Licensee Name: DENVER RADIO ELECTRONICS & TECHNOLOGY
License: WQLM728
Status: Active (2010-03-10)
County: SWEETWATER CARBON EMERY
State: WY
Radio Service: GB: Business, 806-821/851-866 MHz, Conventional
Notes: RADIO USED FOR SERVICE OF COMMUNICATION FACILITES. RADIOS WILL BE USED FOR INTERNAL COMMUNICATIONS.

# Tower ID Type Ant Height Struc Height Elevation Address
1 NNTANN 38.1 43.8 2102.0 430 Bitter Creek Road
2 0.0 0.0 0.0
3 TOWER 24.0 24.0 2291.0 Nine Mile Hill
4 0.0 0.0 0.0
5 TOWER 15.2 15.2 2335.0 9005 Cedar Mountain Road
6 0.0 0.0 0.0

DENVER RADIO ELECTRONICS & T WQLM728 815.81250 2010-03-10 A 70 0 MO GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 860.88750 2010-03-10 A 1 0 FB2C GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 860.81250 2010-03-10 A 1 0 FB2C GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 856.78750 2010-03-10 A 1 0 FB2C GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 811.78750 2010-03-10 A 70 0 MO GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 860.88750 2010-03-10 A 70 0 MO GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 860.81250 2010-03-10 A 70 0 MO GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 856.78750 2010-03-10 A 70 0 MO GB Bitter Creek
DENVER RADIO ELECTRONICS & T WQLM728 815.88750 2010-03-10 A 70 0 MO GB Bitter Creek

Most Is Just Been Granted And is Based From Bitter Creek Wyoming. I am Hearing the Data Channel Off of Cedar Mountain In Emery County, Utah However I live In West Price in Carbon County, Utah and I think i am Almost Too Far Away to Get a Site ID or TGID's However i move around some so i am trying to at least get a fix on this info. If anyone can search this info out let me know... So Far i Have my 396T Scanner Set to EDACS "WIDE" "Decimal Format" LCN 1 856.7875 (Data Control Channel) 2 860.8125 3 860.8875 and it is Trunking. I am Getting Mixed Site ID #'s From the Control Channel. Any Help Would Be Appreciated. The 396T gives me the Choices of EDACS "WIDE" "NARROW" or "SCAT" And an EDACS ID Format Choice of "AFS Format" or "Decimal Format" And LCN Channel info....

Thanks For any Help

 

[tyytor]

good find, is there any way you can run pro96com or unitrunker??
that would tell you a lot of information about the system as well as what the scanner will,
also is there any way you can do a 5 min control channel recording?? .wav ,mp3 ..ect

may be some one that is close will fill in the blanks,
thanks for posting

 

[enosjones]

Here is a piece of the data channel audio it wouldnt let me upload a bigger one... sorry weak signal

 

[enosjones]

tyytor, i sent you an email with 7 minutes of recording, did u get it? i sent it a couple of nights ago.....

 

[tyytor]

hi, i got it and it was in good shape, but i could not get pro96comm or unitrunker (retro)
to get a good decode on it,
on your 369t you set it up to work with pro96comm
and out put the data to you commputer that would give you a lot of information,
or do you have an old scanner that you could tap for discriminator??

 

[enosjones]

I do not have a discriminator tap. I take my scanner to work and get full bars to get good signal but i dont have my lappy when i work. when i get home i get hardly any signal from inside the house so the lappy cant decode it and the 396T gives to multiple site numbers when it tries to decode it, its not consistent.

 

[tyytor]

ok, so what do you hear as far as radio traffic on the groups??
is it mineing, oil, constuction ect...
the sites in rawlins and rocksprings are not that far away
i might just take a drive over there and see if it is trackable if
would be a good fined??

 

[enosjones]

All i know is that says its Denver Radio Electronics According to the FCC liscense it is not active other than the control data channel i have heard no traffic as of yet.

 

[enosjones]

Did anyone in Wyoming Ever hear this Control channel or heard any activity in this? ive not heard anything yet...

 

[tyytor]

hi, i have reviewed your recording that you sent me a long time ago and came up with a
EDACS Provoice system ProV0001 from unitrunker,

 

[enosjones]

ok so what does that mean and did you ever hear anything like that come up in wyoming? or can you give me any ideas on what setting on my scanner should be set?

 

[puzzleriddle]

Digital Speech Decoder (software package) - The RadioReference Wiki

Trunking Control Channel Decoding - The RadioReference.com Forums