Pro-651

[ranger61799]

Hi everyone,

I purchased a Pro-651 last night. I have the trunked radio system programmed in with the talk groups I want to monitor. When I am scanning, I can see that the scanner stops when there is a transmission on a certain talk group, but there is no sound.

Does anyone have any ideas? Other conventional frequencies work OK.

Please let me know.

 

[jfhtm350]

Sounds like the system was rebanded and you didnt program any custom tables in.

 

[retiredmich]

What County are you in, did you use software or manually programed it ?

 

[ranger61799]

I am in Sheboygan County, Wisconsin. I programmed it manually. Any ideas? How do I put custom tables in?

 

[jfhtm350]

Is this the system your trying to program in?
Sheboygan County Public Safety Trunking System, Sheboygan, Wisconsin - Scanner Frequencies

I dont see any custom tables there.

 

[hiegtx]

Is this the system your trying to program in?
Sheboygan County Public Safety Trunking System, Sheboygan, Wisconsin - Scanner Frequencies

I dont see any custom tables there.

It's a rebanded system. Those tables are not listed for each site.

Standard tables, different for Uniden and GRE designed models, are in the WIki.

I am in Sheboygan County, Wisconsin. I programmed it manually. Any ideas? How do I put custom tables in?

See the instructions for entering the required tables on the lower section of this page: Programming Shortcut PSR-500/600 RS Pro-106/197 - The RadioReference Wiki

 

[jfhtm350]

I dont know how to tell you how to program them manually. I use software and its alot easier. There should be a couple of built in choices to pick from. I believe one says standard, the other says splinter, and I think there is another one. You could pick standard and try it or the others.

 

[hiegtx]

I dont know how to tell you how to program them manually. I use software and its alot easier. There should be a couple of built in choices to pick from. I believe one says standard, the other says splinter, and I think there is another one. You could pick standard and try it or the others.

The step by step instructions for doing it manually are in the Wiki link I provided. That also has a link to the correct tables for the GRE design scanners (the Pro-651 is, essentially, the same as the older Pro-106 or PSR-500, but now manufactured by Whistler, not GRE).