PRO 668

[papa5]

Does the Pro 668 support the VHF Conventional frequencies , I have been trying to scan the Burleson County vicinity in Somerville Texas area but do not get anything ,

 

[Carlos29532]

PRO 668 VHF

I have the pro 668, and am picking up the vhf high and low channels. It might be that they have moved off the vhf and onto the uhf high band. First are you in that county? Sometimes I am in the county that I'm scanning and cant get a thing for either their power output or atmospheric conditions. Most likely it is frequency change. If other then idk! Hope this helps.

 

[marksmith]

The 668 Is a very capable radio and gets any vhf conventional frequencies that you would be trying to get.

I would go to the radio reference website and review your county there. Even better, I would go into the application that came with your radio and pull in the appropriate stuff from the database. I presume you have already done this, but not sure how you programmed the radio that you are asking the question the way you are.

Mark
WS1095/536/436/996P2/HP1e/HP2e/996XT/325P2/396XT/PRO668/PSR800/PRO652

 

[papa5]

marksmith , I went to radio reference and checked out the frequencies and it did show the 155 and 154 frequencies , and when I go to review the object in the scanner it gives me an error message ,I programmed it thru the pc

 

[papa5]

marksmith , I just noticed that frequency 155.95500 is not in the conventional list under Burleson County TX , is there a way I can enter it manually and if so can anyone let me know how it is done , that may be a reason I do not hear anything ,

 

[marksmith]

If you are certain this is a valid frequency then there is a way to add to the database, but do it because you valve verified it as a valid frequency, not to try it in the radio.

Use the software to enter anything not in the database on the conventional tab and upload to the radio.

Mark
WS1095/536/436/996P2/HP1e/HP2e/996XT/325P2/396XT/PRO668/PSR800/PRO652