• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

PRO510XL Antenna Problem

Status
Not open for further replies.
marksroberson

marksroberson

Member
Joined
Jun 16, 2014
Messages
155
Location
Florida Panhandle
I have a PRO510XL on my desk here running off a Pryamid PS-3KX (13.8 Volts, 3 amp constant- just for listening on 19) and a Wilson Little Wil on the Air conditioning unit outside the window. It worked great until a few weeks ago when the antenna got bent, so I moved it to another location on the A/C unit, I went out there about 2 days ago and bent it back, I then powered back up the CB radio, the antenna is connected, but the radio has no signal, no signal bars or anything. so today I unscrewed the antenna and as I was unscrewing it the signal came back, It works when the middle part of the connector is only touching, if I screw it in the signal disappears, any ideas?
 
Status
Not open for further replies.

Similar threads

N
AM or FM MODULATION BETTER FOR OFF-ROAD TRAIL COMMS
2 3 4
Replies
77
Views
4K
nokones
N
K
SDS100/SDS200: Partial signal dropouts
Replies
4
Views
382
KO8A
K
SatHunter
No Sound With DSDPlus
2
Replies
25
Views
1K
SatHunter
SatHunter
C
Refracted signal question
Replies
13
Views
567
Ubbe
U
O
Signal improvement using a ferrite rod with a small loop antenna
2
Replies
33
Views
3K
prcguy
prcguy
Top