PRO95 Trunking Issue

[18-3box]

alright, i have a radio shack pro95 scanner.


i had the radio shack guy(s) program the trunking for me because i wasn't quite sure how to do it. when programmed, it had everything in it- pd and fd talkgroups and tacs (anne arundel county, md). i don't want pd, i just want the fd. i have deleted all of the pd talkgroup tag #s and whatnot and now i have the mode set to MO on ch.s 0 and 3 (trunking channels) and all of the freq on the 800mhz are set to MO and the bank is open, yet i do not get any conversing between units and dispatch. is there a solution for this? i have been on here before trying to figure this out and the problem has come back.


i only want 0016 (dsptch), 0048 (tac ch1), 0080 (tac ch2) and just the standard stuff and i am still getting pd tags and stuff. i no longetr have any tags numbered these (like 1616 [northern district pd] and all of the others) and i can't figure it out.


can any1 help?

thank u very much.

 

[18-3box]

Just to let everyone know, after over a year to get the trunking to work, i actually got it to begin operating.


thank you for all of the help, all!

 

[Bentley]

Ever try to use win95 to program your scanner? Makes life MUCH easier....programming trunking will be a breeze using this program. Its available for free at www.starrsoft.com . You'll just need to buy a programing cable from radio shack (cheap), but its well worth it.

 

[fmon]

Just to let everyone know, after over a year to get the trunking to work, i actually got it to begin operating.


thank you for all of the help, all!

Put the scanner in Closed Mode.