• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

programming help

Status
Not open for further replies.

njffemt08

Was emtfirebug14
Premium Subscriber
Joined
May 2, 2013
Messages
94
anyone know how i can program my pager tones into my 2180 i know there is a way but not sure how to do it
 

SVFC462

Member
Feed Provider
Joined
May 30, 2006
Messages
178
Location
Connecticut
First ... find the a,b,c,d, etc (the tones for your pager)

Second ... there get added into the tone decode section in operational features.


Sent from my iPhone using Tapatalk
 

njffemt08

Was emtfirebug14
Premium Subscriber
Joined
May 2, 2013
Messages
94
which tap is it under i dont see anything that says tone decode under optional features
 

kayn1n32008

ØÆSØ
Joined
Sep 20, 2008
Messages
6,601
Location
Sector 001
which tab is it under I don't see anything that says tone decode under optional features

Because it is not under optional features.

Edit -> 2-Tone

Select 2-Tone

Once the screen opens, select 2-tone 1 tab, and enter the relevant tone information.

After entering the tone information, in the zone edit screen, under 'Opt Signal' select '2-Tone 1' for the channel you wish to have 2-Tone signalling on.
 
Status
Not open for further replies.
Top