Programming HT using CPS ay help appreciated

[W3LDR]

So I have used Chirp over the years however got in a Quansheng UV-K5 that uses the CPS programming software. I have been out of Ham Ops for 3 years so having to refresh my self in programming so thats the first issue. When you dont use thing you forget things. Atleast in my case..

I tried to copy the info from chirp manually but either i am placing inf in the wrong field or I do not have a option selected correct. For simplex GMRS for example simplex works perfect. But every repeater I put in none hit local repeaters that i can get easily on my other radios. I even tried to trasmit using a sma to so239 patch cable to my antenna at 3oft. No dice. I really think I have a setting wrong or something not selected. attached are som inages of a few lines I have in CPS channel 3 and 4 for example I know these are active repeater I can hit with my other HTs so I will attach repeaer book images for those 2. Does anyone see where I am screwing up in the programming software.

Any help is appreciated

Here are the repeater book settings

 

[chief21]

Remove all CTCSS tones on your receive frequencies. Most amateur repeaters do not transmit a CTCSS tone. Tones are often needed on transmit for repeater access.

 

[mmckenna]

And set your bandwidth to 25KHz, unless you know for sure the repeater is running narrow.

 

[paulears]

Make sure the frequencies are the right way aroun. Can you screenshot your fault code plug, that would make guess work unnecessary

 

[W3LDR]

Make sure the frequencies are the right way aroun. Can you screenshot your fault code plug, that would make guess work unnecessary

How do you locate fault code plug

 

[lamarrsy]

Make sure you transmit on the right position on the radio : the radio has A and B « bands ».
You could very well have the radio set to receive both but set to always transmit in the B side…
so anything you will do on the A side will have no effect on your transmit, as the radio will alway use the B side memory channel / VFO to transmit.