• Effective immediately we will be deleting, without notice, any negative threads or posts that deal with the use of encryption and streaming of scanner audio.

    We've noticed a huge increase in rants and negative posts that revolve around agencies going to encryption due to the broadcasting of scanner audio on the internet. It's now worn out and continues to be the same recycled rants. These rants hijack the threads and derail the conversation. They no longer have a place anywhere on this forum other than in the designated threads in the Rants forum in the Tavern.

    If you violate these guidelines your post will be deleted without notice and an infraction will be issued. We are not against discussion of this issue. You just need to do it in the right place. For example:
    https://forums.radioreference.com/rants/224104-official-thread-live-audio-feeds-scanners-wait-encryption.html

Radioshack PRO-94

Status
Not open for further replies.

podsmaster76

Member
Joined
Jul 27, 2006
Messages
6
ok guys you have been helpful everytime thus far.i have acquired a pro94 and went and bought the cable from radioshack to program it through my pc.now i see on scancat lite that i need to buy the $30 usb mono cables.will this cable i bought which is the 20-289 not work for the pro94? and by the way it is the pro94 B model...thanks in advance
 

DaveIN

Founders Curmudgen
Database Admin
Joined
Jan 5, 2003
Messages
6,508
Location
West Michigan
FireCop said:
The Pro-94 (Model #20-524) can not work with the 20-289 programming cable. Take it back (if you can) and get a refund.
It will, if you have a PRO-94B with the PC/IF port.

http://www.radioshack.com/product/index.jsp?parentPage=search&summary=summary&techSpecs=techSpecs&currentTab=summary&cp=&custRatings=custRatings&features=features&accessories=accessories&productId=2102471&origkw=20-524&support=support&kw=20-524&tab=accessories

Take a look at ScanCat-Lite: http://scancat.com/
 
Last edited:

ka3jjz

Wiki Admin Emeritus
Joined
Jul 22, 2002
Messages
21,893
Location
Bowie, Md.
(to continue the thread ...the most logical question is what software works with the 94b?)

and the only software that's known to work with it is Scancat Lite Plus 73s Mike
 
Status
Not open for further replies.
Top