SDR Trunk on Harris System

timkilbride

Member
Database Admin
Joined
Feb 9, 2006
Messages
1,886
Location
Linn Co Iowa
I'm actively following a Harris System with SDR Trunk. Everything is working correct, except one thing.

When County does a multi group call (2 or more talk groups), the Harris system will assign a random, dynamic talk group for the transmission. SDR Trunk will record/follow the randomly assigned talk group instead of each talkgroup in the multi group call. How can I get SDR Trunk to follow the specific talk group(s) instead of the dynamic one assigned by the controller, if even possible? Any work around for this? This creates a problem uploading calls to Broadcastify because the calls don't go to the proper talk group.

Thanks

Tim
 

maus92

Member
Premium Subscriber
Joined
Jun 23, 2004
Messages
8,119
Location
The OP
When talk groups are temporarily patched together at the console (Simulselect) all voice traffic is routed to the newly created dynamic talk group, subscriber units are directed to the dynamic talk group, and voice traffic is no longer transmitted on the member talk groups. This is done to conserve channel resources. Since nothing is transmitted over the individual member talk groups while the Simulselect patch is in effect, SDR Trunk cannot record / upload them.
 
Top