SDR W/ DSDPlus

[TongSlinger]

Can anyone look at my log and tell me where im going wrong? I can see and it, but I'm not getting any voice. You help would be greatly appreciated.

thanks in Advance!

<LOG>
DSD+ 1.101pt
NOT saving synthesized audio to DSDPlus.mp3
wav/mp3 file generation interval = 0 minutes
MP3 ABR set to 15 kbps
Enabling output audio AGC
Setting unvoiced speech quality to 3 waves per band
Scaling factor set to 64
Damping level set to 10
Viewport size set to 20
Source audio waveform window origin set to (10,10)
Source audio waveform window dimensions set to 200x300
Source audio waveform window update period set to 100 ms
Event log window origin set to (50,50)
Event log window dimensions set to 400x500
Event log window font height set to 15
Channel window origin set to (90,90)
Channel window font height set to 15

audio input device #1 = 'CABLE Output (VB-Audio Virtual '

audio output device #1 = 'Speakers (Creative SB X-Fi)'
audio output device #2 = 'CABLE Input (VB-Audio Virtual C'
audio output device #3 = 'Realtek Digital Output(Optical)'
audio output device #4 = 'Realtek Digital Output (Realtek'

audio input device #1 (CABLE Output (VB-Audio Virtual ) initialized
audio output device #2 (CABLE Input (VB-Audio Virtual C) initialized

D-STAR decoding enabled
NXDN4800 decoding enabled
NXDN9600 decoding enabled
DMR/MotoTRBO decoding enabled
P25 Phase 1 decoding enabled
X2-TDMA decoding enabled
ProVoice decoding enabled

Mono audio decoding initiated; press Esc to exit...
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
+DMR CACH ERR slot2 BS DATA ERR3 DCC=12 Unknown TypeF
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC=12 PI Header
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=14 Voice Hdr
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=13 PI Header
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=1 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC=10 Voice Hdr
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=0 Voice Hdr
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Voice Hdr
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=15 MBC Header
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC=12 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=14 Voice Hdr
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=3 Voice Hdr
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=8 Idle
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=14 Voice Hdr
Sync:+DMR
+DMR slot2 BS DATA ERR2 DCC=12 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC=12 Idle
+DMR slot1 BS DATA ERR3 DCC=15 Unknown TypeD
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=10 MBC
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=8 CSBK
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC=12 Idle
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=10 Voice Hdr
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Unknown TypeB
Sync:+DMR
+DMR slot2 BS DATA ERR3 DCC=14 Idle
Sync:+DMR
+DMR slot1 BS DATA ERR3 DCC=14 Idle
+DMR CACH ERR slot2 BS DATA ERR3 DCC=12 Idle
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 Idle
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=14 Idle
Sync:+DMR
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC=12 PI Header
Sync:+DMR
+DMR slot2 BS DATA ERR3 DCC=15 Voice Hdr
Sync: no sync

 

[mattwillson]

My thought is the audio output device should be set to speakers '-o1'. This shows
audio output device #2 (CABLE Input (VB-Audio Virtual C) initialized.

 

[TongSlinger]

I can hear the digitized audio coming from the speakers. its as if i'm listening to an analog channel (Un Decoded)

 

[mattwillson]

Post the command line parameters you are using to load DSD. If your starting it from SDR#, first click on the configure button. Make sure output audio device is set to 1.

 

[TongSlinger]

-v2 -O NUL -I0 -i1 -o2 -g0 -u3 -dr0 -dh0 -ds64 -dd10 -dv20 -M15 -fr

Is the ERR3 an error code.

BS DATA ERR3 DCC=12 Unknown TypeD
BS DATA ERR3 DCC=8 Voice Hdr
BS DATA ERR3 DCC=13 PI Header

 

[mattwillson]

-o2 needs to be -o1. Click configure and change output audio device to 1 then click create command line and ok.

 

[TongSlinger]

?
Which is 1

 

[mattwillson]

DSD interface config.

 

[TongSlinger]

Currently> -v2 -O NUL -I0 -i1 -o1 -g0 -u3 -dr0 -dh0 -ds64 -dd10 -dv20 -M15 -fa

now i can't hear any audio

 

[mattwillson]

If you changed the setting under Audio shown in your screenshot, change them back. You only need to change the DSD interface settings.

 

[TongSlinger]

Thanks for the illustration. i am configure as you are and i have the sound back but still no decode.

 

[TongSlinger]

Apologizes for using all you time. i've watched several utube vids and no help

 

[mattwillson]

Your first post shows a lot of data being transmitted, not any voice. Are you seeing anything beside BS DATA? Mine shows BS VOICE, BS VC2, BS VC3, BS VC4 ect. when there is audio.

 

[TongSlinger]

-v2 -O NUL -I0 -i1 -o1 -g0 -u3 -dr0 -dh0 -ds64 -dd10 -dv20 -M15 -fa

Everything Is BS DATA. I didnt see any BS VC 2, 3 and 4


This just came in, but i didn't hear ant voice.......................................................................................

audio input device #1 = 'CABLE Output (VB-Audio Virtual '

+DMR CACH ERR slot1 BS DATA ERR1 DCC
+DMR CACH ERR slot2 BS VOICE e:7r6r5
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC2 e:6m7r7
+DMR slot2 BS VC3 e:6r6m6
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC4 e:6r6r7
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC5 e:6r6r6
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC6 e:7m7r7
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR2 DCC
Sync: no sync
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC
+DMR CACH ERR slot2 BS VOICE e:7e7r6
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC2 e:5r5m5
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC3 e:5r6r7
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC4 e:7r7r5
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC5 e:6m6r7
+DMR CACH ERR slot1
+DMR CACH ERR slot2 BS VC6 e:7r6m7
Sync:+DMR
+DMR CACH ERR slot1 BS DATA ERR3 DCC
Sync: no sync

 

[TongSlinger]

now i'm back to data on for the most part only sporadic voice and VC#'s

 

[mattwillson]

I don't know enough to be of much help from here. You could upload a raw source audio recording, and I could try to decode it to see if there's audio. In the DSD+ Event Log window, press r to record after you see some voice transmissions press r again to stop recording. You will probably have to compress the file in a .zip so it's small enough to upload.

 

[TongSlinger]

Do i need to set up a destination folder for the audio? I'll try to capture when its putting out Voice!

Steak dinner on me if you get to the central part of this great land.

 

[mattwillson]

Just to check one thing, are your speakers hooked up to your X-fi sound card? That's what I had you change DSD interface audio output to. Here are the four options for your system:
audio output device #1 = 'Speakers (Creative SB X-Fi)'
audio output device #2 = 'CABLE Input (VB-Audio Virtual C'
audio output device #3 = 'Realtek Digital Output(Optical)'
audio output device #4 = 'Realtek Digital Output (Realtek'

Originally it was set to 2, I had you change it to 1. You could try changing it to 3 and 4 to try all configurations.

 

[Kazzaw]

Make sure as above your output from SDRsharp matches your input to DSDPlus. Then make sure your output from DSDPlus matches your speaker/headset configuration (likely Device 1)

Your ERR's are likely caused by either low to no signal strength, or could be the audio feed from SDRSharp to DSDPlus (incorrect volume level, bandwidth, etc)

 

[mattwillson]

Is your gain turned up? It's the gear icon on the toolbar in SDR#.