SDS100/SDS200: SDS100 Audio Interruptions

Unidener

Member
Joined
May 28, 2012
Messages
358
Ok.....another dumb question....

Some of my longer transmissions there is a very short stop in the audio and I'm pretty sure it's because of something that I've enabled. Maybe ID search or something of that nature?

Thanks
 

RMason

Active Member
Premium Subscriber
Joined
Sep 18, 2003
Messages
924
Location
Colorado / Mississippi
Some of my longer transmissions there is a very short stop in the audio and I'm pretty sure it's because of something that I've enabled. Maybe ID search or something of that nature?
It sounds like Close Call or one of the priority modes are turned on. Each of these will cause interruptions in the received signal. Check to see if you have any of these turned on:

Priority Scan
Close Call
Weather Priority
 

Unidener

Member
Joined
May 28, 2012
Messages
358
Priority
Close Call
Something of this nature
Priority & CC are what I expected.....I do have CC enabled and just wanted to verify that was probably the issue (to be expected). I don't have Priority enabled so now I've disabled CC to see if the problem stops (prob will just wanted to verify).....

Thanks!
 

Unidener

Member
Joined
May 28, 2012
Messages
358
ID search wouldn't interrupt audio. Please check the aforementioned settings
Great.....do have that enabled and glad to hear that's not the culprit.....I've got a new 100 and just making sure it's not the scanner (didn't think it was just wanted to verify!) Odd......never noticed on my SDS200
 

garys

Member
Premium Subscriber
Joined
Jun 13, 2002
Messages
6,432
Location
Texas
It's possible, I know because I've done it, to turn on the Weather Priority in error. As I recall it interrupted receive audio about every three seconds.
 
Top