So today I wanted to test out my Motorola PMMN4050A speaker mic. On Motorola's website it says that this is a noise canceling Impres mic. I went to my local tree lighting and some fire engines were passing sirens wailing. I keyed on an analog repeater and asked for an audio report. The other operator said he could hear me but only about 10% of the audio was my voice. I wanted to know if this is how noise canceling mics always sound? Did I do something wrong? Is it something in the programming that I might have missed or does it only work on digital? I am aware that in order to get the full noise canceling you must speak directly into the front of the mic so that the back mic doesn't pick up your voice. Any help on this would be appreciated.
-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Speaker mic help PMMN4050A
- Thread starter K2NEC
- Start date
-
- Tags
- motorola pmmn4050a speaker mic xpr
