• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

SWR and Grounding CB Toolbox Installation

Status
Not open for further replies.

MisterLongwire

Amateur radio operator/QC tech for radio mfr.
Banned
Joined
Jan 1, 2014
Messages
578
Location
San Marcos,Escondido, CA.
OK...moving the antenna around didn't help much...yeah I am getting a very low SWR, however having mounted it left rear about 8 inches from the rear of my pickemup hasn't helped much regarding directional. Since my fender panels(outside) are steel and my bed composite, and my tailgate steel means my antenna signal is hitting forward to the right,, correct?
 

prcguy

Member
Joined
Jun 30, 2006
Messages
15,233
Location
So Cal - Richardson, TX - Tewksbury, MA
Others have mentioned the best signal will be in the direction of the most metal, so unless its mounted in the center of a van roof its going to favor some direction, no way around that. In my experience is noticeable but not drastic. And my antenna mounted behind the cab of my truck on the drivers side seems fairly even in all directions, or at least not directional enough to bother me.
prcguy

OK...moving the antenna around didn't help much...yeah I am getting a very low SWR, however having mounted it left rear about 8 inches from the rear of my pickemup hasn't helped much regarding directional. Since my fender panels(outside) are steel and my bed composite, and my tailgate steel means my antenna signal is hitting forward to the right,, correct?
 
Status
Not open for further replies.
Top