Trouble Scanning Norman with Pro-2052

[SCPD]

I have tried to find any discussion about this, but have not. Here goes, I have recently programmed the Norman Trunking System into my 2052. I have programmed the freqs in this order: 856.7625, 856.9625, 857.7625, 857.9625, 858.7625, 858.9625,859.7625, 859.9625, 860.7625, 860.9625. All Channels but 856.7625 show as a trunking channel. Currently 860.7625 is the control channel. The "M" icon shows on all channels but 856.7625 (M=Motorola trunk frequency with this scanner). I can hear traffic on this frequency, but no Talkgroup ID, it shows as a conventional frequency. All the other nine freqs work showing thier TG ID's. The 856.7625 just does not show as a valid trunk frequency. My question is: Is this frequency part of their trunk system, or just a conventional frequency?

 

[n5bew1]

856.7625 is a trunked frequency on Norman's system. The channel that you have that freq in may need to be reentered as trunked as it may be in conventional mode. Not sure how the 2052 does it.

 

[SCPD]

It's fixed

I erased all the channels for the Norman system and reprogrammed them and this time when I put the 856.7625 in as the first channel, the "M" icon displayed. I must have made a mistake programming that particular frequency the first time.

Thank-You