Last year I got introduced to DTRS monitoring using the RS Pro-106 and Win 500. From this forum I learned about the basics and accomplished to program what I wanted to listen to. Here is how I applied what I learned.
I wanted to monitor Pueblo. I looked at the Colorado DTRS sites located around the Pueblo area. I took only the red (c) Primary Control channel and put those into the Frequency section of the TSYS. After I had all of the (c) frequencies entered I began inputting in the TGRP numbers listed on the Pueblo County Talkgroups section. Once I had all of the ones in that I wanted I saved and uploaded into the scanner.
I began receiving transmissions and everything is working as I believe it should.
These questions stem back to the Pueblo AMR exercise I have recently gone through. Without the help from this Colorado Forum pointing me to the Summit Ski and Mt. Pittsburg sites for monitoring I would have never tried and probably not have gotten it to work.
Now I notice that the 4897 is on the Pueblo County talkgroups chart.
4897 1321 D PUEBLO AMR-1 Pueblo AMR Ambulance Channel-1 EMS Dispatch
Here are my questions finally.
1. Without knowing to program in the correct frequencies from Springs will anybody get the Pueblo AMR traffic?
2. How do I know I have not put too many DTRS sites into the frequencies?
3. As I monitor can I determine what DTRS sites are being used and which are not?
I wanted to monitor Pueblo. I looked at the Colorado DTRS sites located around the Pueblo area. I took only the red (c) Primary Control channel and put those into the Frequency section of the TSYS. After I had all of the (c) frequencies entered I began inputting in the TGRP numbers listed on the Pueblo County Talkgroups section. Once I had all of the ones in that I wanted I saved and uploaded into the scanner.
I began receiving transmissions and everything is working as I believe it should.
These questions stem back to the Pueblo AMR exercise I have recently gone through. Without the help from this Colorado Forum pointing me to the Summit Ski and Mt. Pittsburg sites for monitoring I would have never tried and probably not have gotten it to work.
Now I notice that the 4897 is on the Pueblo County talkgroups chart.
4897 1321 D PUEBLO AMR-1 Pueblo AMR Ambulance Channel-1 EMS Dispatch
Here are my questions finally.
1. Without knowing to program in the correct frequencies from Springs will anybody get the Pueblo AMR traffic?
2. How do I know I have not put too many DTRS sites into the frequencies?
3. As I monitor can I determine what DTRS sites are being used and which are not?