XPR5550e channel staying open

[cpotter1112]

So, I've had an XPR4550 in my truck for a while now, all analog channels (oilfield and logging roads in western Canada). I found a good deal on an XPR5550e, programmed it with all the same channels (drag and drop the channel groups from one codeplug to the other in mototrbo cps), swapped it into my truck. Listened to weather channels no issue. Give a friend my Kenwood handheld for a road trip, when he stops transmitting the channel stays open on the 5550. Sometimes it stays open for a second or two, sometimes until I power down the radio. We tried a few different channels with the same results. I swap my 4550 back in, no issues. I've got the CPS open in expert mode and the two codeplugs side by side and can't see any difference between them. Anybody have any suggestions?

 

[a417]

are you using carrier squelch on the analog channel with the issue?

 

[cpotter1112]

are you using carrier squelch on the analog channel with the issue?

Yes. They are all set up as CSQ. Every channel we tried yielded the same result with the 5550 but not with the 4550.

 

[a417]

what's the current squelch level set at?

 

[cpotter1112]

what's the current squelch level set at?

-124dBm, same as my 4550.