cable

Hi guys, I am new here so welcome everybody. and sorry to ask for a help straight after registration but I struggle with this a lot. I purchased used icom-f80ds p25 radio from ebay for almost nothing. It seems like a nice radio, durable and biger than other radios I have, but I cannot get it...

I purchased a programming cable from the Internet, new & sealed. Provided was a CD that contained a bunch of 'bloat-ware' and the "MULTIPLUG-FWX" virus/malware. All my restore points were erased, and internet explorer home page was changed to "about:blank" not to mention many other issues! If...

Hello everyone! I have a problem. Yesterday I started to record my Uniden bc125at scanner with scanner recorder program. ( using scanner headphone jack, cable like this 3.5mm jack to rca - , and adapter 3.5mm jack to rca - to connect to scanner ), but there's one problem- noise. (example, starts...

I am really not sure where to post this in the tavern.... Myself and several others I am acquainted with have been having issues with RFGUYS. Orders have taken more than nine weeks and still not arrived. A programming cable had a broken pin in it when it arrived, making the cable useless...

Good evening, all! I recently purchased a used BCD-996XT from eBay, and it came with a 4-pin mini-USB programming cable. (It doesn't appear to be Uniden, and I'm almost positive it's not the USB-1 cable.) Since it came with the scanner, I presume the previous owner was using it. Anyhoo, it...

I've got an IC-R5 I haven't used in years and I'd like to start using it again. If memory serves my programming cable was a D-Sub cable (I can't find it). I only have Windows 7 PC with USB ports now. Where can I buy a USB cable (or good instructions to make one) that will work with the IC-R5...

I have the shielded RJ45, and I have shielded Cat6 cable, the black one that can go outside. I don't think that matter much, but it has a tough thick outer covering and that can only be good. Has anyone made one as long as 50 feet or longer with success? Does anyone agree that the cable being...

what programming software and what cable would i need to program a motorola xpr4350 and how much should i expect to pay for each

I don't own the 436HP yet, but I do own a relic Garmin GPS V which has a NMEA output. I can buy various cables to fit the GPS. Some have serial connectors (PC connect), some are bare wire, etc. What would be the simplest cabling method to hook the two together?

Can anyone show/tell what the 396xt cable looks like? I think I bought the one from Scanner Master. My problem is, it got misplaced. I found a usb cable that fits it, but my computer doesn't recognize it and assign a COM port, so I am not sure if I got the right cable or not.

Hello thanks for looking. I have IC-208H and appropriate programming USB cable and I wonder if I can use 3.5mm stereo female-to-2.5mm stereo male cable adapter to fit it into the ID-880H. I don't really feel like spending $$ on another cable only because Icom decided to change the data jack...

I know. . . another thread. I have been scouring through the forum looking for a solution to my problem, but can't seem to find it. Problem: I connect my 396t with a USB1 cable to a Win 7 machine. I've updated the PL2303 drivers, but for the life of me I cannot see the scanner. There are no...

I've recently stumbled onto a problem with my Pro-106 Scanner and my PC/IF cable. (RS Category No. 20-047). It seems that either A). My computers sound card is not capable of picking up the audio data being put out from the scanner and cable or B). The model cable I have for the scanner isn't...

Hello all; I plan to purchase a Uniden Bearcat BC346XT, found at the link below, for use in the NYC area. I plan to use Freescan to program it myself, but I was curious to know whether or not the Serial to USB Adapter cable below would be compatible. It seems as if it has the correct chipset...

I am trying to figure out how to create a interface cable between my Kenwood TM-D710A Model K and my Garmin Nuvi 200. Does anyone have any extertise in trying to build a cable and if so, have any directions? Better question, is it even possible? Thanks, Andrew KK4IFN

Hello all! I was wondering if anyone had or by chance knows where to find the schematic for the KPG-46U. I did some searching but so far can only find information on the cable in general or sites selling manufactured ones. I did find a YouTube video for the construction of a programming cable...

Hello all: I was wondering if anyone had schematics on the KPG-22 usb programming cable. I've done a search on the net, and all I can really find are plans for the serial cables. Any information or help in the matter would be appreciated. Thanks, Methus

I am putting up a new Diamond Discone antenna with a 16 port powered splitter (Multi-Coupler) from Digital Loggers. The antenna run is LMR-400 with Type N Connectors. The length is 100' total. From the multicoupler I am trying to decide what cable to run. Each cable from the Multi-Coupler is...

Hi, I recently purchased a used Pro95 scanner and programming cable (catalog #20-048). When the cable is inserted, the screen switches to clone mode, as expected. However, when I attempt to transfer data using Win95, the transfer always fails and says "expected to read back the data we just...

Hello all, I just bought my first Kenwood today (and, in general, my first "professional" two-way radio) and was interested in programming some frequencies into it to listen to. From what I have gathered so far, I believe I need a KPG-22 cable (correct me if I'm wrong) to connect the handheld...