noise

I was just wondering what methods people use to eliminate the ground loop/hum issue when your scanner is plugged into your PC? I am interested in becoming a stream provider, but cant get past this issue... Ive tried a ground loop isolator, but am now out of ideas... any helpful hints/tips???

On a single channel on my older UHF (450-520) HT1000 there's an intermittent noise, similar to the sound of the squelch opening. The noise occurs about once every two seconds, and lasts for about one second. Upon comparing the noise to the actual squelch opening, it sounds softer. The sound does...

I don't operate any wireless equipment at my living location. This includes computers, computer equipment, routers, non-computer equipment, etc. I'm having a problem with one of my LCD monitors. It works without problems. That was until I picked up some heavy static noises from a hand held...

Hello! Ok, so i bought a used ht1000 and it has an issue. I had the first 8 channels programmed to gmrs and the other 8 programmed to local police frequencies to scan. Well, whenever the radio is receiving conversation there is an annoying clicking noise that occurs whenever the red led light on...

Ok guys. I am stumped. I have been through my codeplugs a few dozen times and I can't see anything wrong with them. Here is the problem, We use XTS5000s for Americans and XTS1500s for our TCNs. Both radio sets have issues regarding the unmuting of transmission. Randomly, but often the radios...

I was wondering if there was anyone else who routinely drives in the south metro on 35W in the Burnsville area, right around the Burnsville Parkway and Hwy 13 areas. Any time I've driven those roads lately (*the last 6 months or so) I've picked up very strong interference along both off ramps...

So I bought some of those USB audio adapters that are all over eBay and I'm disappointed. There is a large amount of noise in them and I don't see how I can use them without getting hate mail from listeners. I tried direct connect and hub with no difference, the audio is terrible. Is anyone...

I have a Uniden BC780XLT hooked up to my server using a Antennacraft ST2. When the scanner is scanning, I and others hear like thumping noise or sounds like someone going down a hallway with high heels at a constant rate. I have moved all my cables around away from any other cables or power...

I need help identifying a signal on about 1.776mhz. It is a data signal and is best heard on LSB. Here you can hear the signal: http://pages.suddenlink.net/k5oai/audio/1736noise.mp3 I tuned slightly off the center so the intermittent tone is audible. Here is the history of this signal. As of...

Hello all, I have a BC898T. This box cant go digital, but I have Oakland FD on it... I programed it just like I should have and for the most part it works... The problem that I have is that the main dispatch channel seems to just go crazy sometimes... It makes this crazy noise for like an hour...