software

  1. M

    XTS2500 Software

    So i have several XTS 2500 radios that i would like to program. Is it still possible to download the software somewhere, and if so where? I've googled all i can and so far all i could find is something called Astro25 Portable R20.01.00 I am some what of a newbie, but i have worked on...
  2. K

    Best Linux streaming software to use with Broadcastify?

    Hello! I just got my feed application approved and I am trying to find a good application to use that is Linux compatible with Broadcastify. It would also be great if it has a GUI, because I don't like using the command line. I was able to install darksnow, but I don't know how it will work. I...
  3. G

    Most Current Software and Firmware for Kenwood TK-5820?

    Later today I have to program 2 Kenwood TK-5820's. What is the most current software/firmware? I have KPG-112D v2.01 and KPG-112DN v2.33 Should either of these work? I am unsure about firmware on radios but they are fairly new. I deal with Motorola much more often and rarely do I program...
  4. L

    Uniden BC125AT program software question.

    When programming my BC125AT with the software uniden offers I need to fill in every window separately. Here’s what I would like to do if possible. Highlight all 8 lines of information from radio reference, copy and paste them all in one shot? Is this possible with any of the other scanner...
  5. JustLou

    Alinco Alinco DJ-X10 Programming Software?

    I know this is a long shot, but does anyone know where I might be able to find programming software for an Alinco DJ-X10? TIA
  6. K7MFC

    Why doesn't Uniden provide programming software for some scanners?

    Just curious as to why Uniden does not provide software for programming their DMA scanners, but does provide software for the Home Patrol, 435/536, and SDS scanners.
  7. G

    Kenwood Nx-5300 programming???

    Does anyone have the KPG-D1N software for the Kenwood NX-5000 series that can program a NX-5300 for me? Being used for a personal radio in Fire Department.
  8. R

    Programing software

    Hello all, I purchased my first scanner. (the Uniden BCD436HP) I was introduced to the scanner world by my uncle and he told me to get a programing software (specifically Sentinal) however I only own Apple computers and it does not seem like Sentinal will run on Mac. Does anyone know of any...
  9. F5HPE

    Better frequency accuracy with FW 1807A for DV10

    For few day, AOR had launch a new DV10 firmware with detail below 1807A 2018/07/13 Feature improvements: - Better frequency accuracy through additional automatic temperature compensation by FPGA/CPU - Better P25 and DMR decoding - Better SSB audio quality - Better SD card compatibility for...
  10. B

    GE MASTR III Software

    I have a Mastr III that has the DSP module and would like to run it in mixed mode, is there any place I can get the software for this repeater? Thanks!
  11. K

    Entering out of band receive frequencies in RT Systems programming software

    In the past I've been able to program my IC-5100 with Receive Frequencies that are outside the amateur band, so long as they are divisible by 5000. I recently re-installed the WCS-5100 software from RT Systems, and I find that it will not accept a RECEIVE frequency out of the amateur band. Is...
  12. iceman382

    Official Uniden Software for the BCD996T

    Subject: Official Uniden software for the BCD996T Version: 1.0.12.0 Anyone have a copy of the BCD996T Uniden Advanced Scanner Director software? BCD996T_UASD_v1.0.12.0.exe The Uniden official link is dead... PM me. Thanks.
  13. I

    UBX125XLT help

    Hi, Apologies up front but I am new to scanning and based on recommendations I have just purchased this scanner from Radio World here in the UK. I opted to have the following added to the scanner: 264 Pre-programmed Airband (UK) Channels and also 190 Pre-programmed Military Airband (UK)...
  14. C

    Win500: Registration Key

    Hello everyone: I have tried 8 times to purchase from StarrSoft the WIN500 software Registration Key and have used 4 different credit cards, was charged on all of them and then did not get any keys. Either the same day or the next I get an email stating that the credit card transaction would...
  15. J

    scanner_software_1_02_build1

    Hi, I am trying to program a Pro-82. I downloaded the zip file from this site but windows7 is unable to open it. Thanks in advance for any guidance. James
  16. M

    BCD436HP/BCD536HP: Trying to install Sentinel on new Win10 system

    New to scanning, I picked up the BCD436HP and now I'm trying to install Sentinel software. Keeps telling me I need framework 2.0 installed. I have the latest framework installed but it doesn't want to recognize it. Could use some suggestions on how to get this installed. Thanks
  17. E

    G- series PPS problems?

    I downloaded the G series PPS on Friday and it worked great i opened it 10 times or more, no problems. i go to open it on Saturday and it gives me an error message before opening that says PPS has stopped working, this is as soon as you try to open it. the part for the password never pops up...
  18. fdnyfish

    FEATURE REQUEST for UNIDEN

    Lets keep a running thread of feature requests to Uniden BCD436HP: Turn on backlight when you turn on the scanner so you can see information Sentinal: Record per Channel feature (Selective Record) Sentinal: Option to clear all QK for all favorite lists
  19. B

    HYT TC-500S U(2)

    I have come by 5 of these little jewels and have no software to support them. Can anybody shed some light on this product Thanks BC
  20. K

    R-7100 Control Software

    After searching for software that will allow us to work with our R-7100 Icom. So far we have been unable to locate any solutions. We are seeking programming and controlling software combined like that which is currently available to scanner users. We have the CI-V box and the serial to USB...
Top