uhf

Hello there, My question is not amateur radio specific but I couldn't find an exact sub forum for my question. I hope it fits in here anyway. (Suggestions?) English is not my primary language, sorry about any English "drifting" of my part. I'm very new to the RF world so (one of) my first task...

I'm new here, and new to SDR, and I'm having the time of my life. Way back in the late 1960s, the USAF had me sitting at a console, staring at VHF and UHF frequencies on a spectrum display, for reasons I can't really discuss still. My guess is that console cost half a million dollars or so...

I currently operate a VHF XTS 5000 Model 2 in New Hampshire where I spend a lot of time however, I spend most of my time in Metro-Boston Mass. And I'm stuck with a real crappy baofeng radio. Does anyone have any suggestions on where to find a 450-512 split 2500 or 5000 for cheap. In addition...

Is there anyone else here in Lincoln County, specifically Lincolnton? Lincolnton PD is on UHF 460.450 MHz and normally there isn't any issues, however for the past few days there has been some major interference on their channel. At first I thought it was just bleed-over from another agency...

They flew here in Sacramento yesterday and left for Canada last night. They have 10 Alpha jets and 1 humungous A400M. Of the 10 frequencies I gleaned from the Internet I copied them on two, 340.300 and 141.825. It would have more fun if I understood French, of course. Yet the A400 was all...

I recently helped out an organization with reprogramming a couple hundred Motorola MagOne BPR40 UHF Radios. During the process of reprogramming the radios several of the radios also needed to be brought within the narrowband requirements. Upon reprogramming the radio for narrowband operation the...

I am a regular volunteer at my local Habitat for Humanity ReStore and we use BPR40 UHF radios. I was thinking about getting me my own speaker mic to make radio use more convenient. I came across a website(I can no longer find) that listed various models of mics that would work with that radio. I...

So I got my hands on a Kirisun PT3500S UHF radio for dirt cheap (50 cents) and am looking for the programming software. I've searched Google quite a bit and can only find the software for the PT3600. The PT3600 software complains that I don't have the correct radio model and won't let me do...

Hello, I have a medium experience with programming Motorola MTS2000 and XTS3000 series. I was able to successfully program buttons, scan lists, channels and zones with those radios. Recently I have got a couple of Motorola XTS5000 UHF radios. When I'm trying to program them using ASTRO 25...

Can anyone in the GTA tell me what exactly this frequency is [463.23750mHz]? I've been listening for the last hour and it sounds like some kind of transportation company but I can't exactly nail down who it is or where it is transmitting from so I can name the channel in my scanner. I've tried...

I programmed my uhf mt2000 to the proper freqs and pl codes. When i try to transmit i get a solid tone. Im not sure why. This is used for work.

While trolling the FCC database recently I found three interesting NCSHP licenses for our far western counties of Cherokee, Clay and Graham. Clay County NORTH CAROLINA STATE HIGHWAY PATROL WQWY934 453.71250 2016-01-04 A 1 0 FB2 PW HAYESVILLE NORTH CAROLINA STATE HIGHWAY...

I have recently purchased a Motorola Maxtrac UHF (449.0 - 470.0 MHz) radio that has already had the VCO and the RX coils tuned down to 440, I am using the Motorola RSS Version R07.02.00a and when I add a channel it defaults as 446.0 but I can not tune below the default 449.00 range. I even try...

Have several Trivec Avant satcom antennas for sale. Have the 2055-3 brand new still in box. And a few of the EGG BEATER ONNIDIRECTIONAL satcom on the move vehicle/helicopter/or boat mountable antennas for less than half of the current going rates, also still new in box... Reply for pictures or...

I'm having a bit of trouble explaining our communication system differences to a coworker. We primarily utilize a UHF radio system with a repeater. So naturally we have 2 frequencies licensed to our program. We have a backup VHF system that is also repeated. We monitor UNICOM (123.050MHz) for...

I finished programming a Motorola GP380 Full-Keypad yesterday and I noticed something on a test key-up, there is no Signal-Strength icon. I've delved through CPS and the help file but haven't found anything that mentions why it's not present. Anyone know how to get it to display? Does it require...

Hello community! I would first like to thank you for taking the time to read through, and possibly assist with, this plea of help I have finally decided to bring to the forums! So without further adue, here is the situation of a new repeater build I am in need of assistance with! I have been...

Any updates?

I'm looking for a UHF mobile to set up as a base radio and stumbled across this website offering them for sale: KENWOOD Kenwood TM-271/TM-471 Vehicle-mounted Mobile Radio 60W Two way radio VHF/UHF Car Radio transceiver CTCSS & DCS with DTMF MIC Brand of Radio KENWOOD Has anyone ever purchased...

I have a HT1000 UHF I talk on local repeaters with to another Motorola guy. He can send me pages with MDC1200 on repeaters without a delay and I recieve them fine but what I want to do is make my HT1000 send a acknowledgement page back to him, I can not find a setting in the MDC options page for...