ARC-XT Pro Scanner Reading Issue

[KJ4TDM]

Has anyone ever had any issues while reading your scanner? By issues I mean it will read to a point and stop? That point is different each time. The software if left alone will read a system every 10-20 seconds. I have 50+ stations so it takes a long time to read them all. I am running ARC-XT Pro Version 2.0 build 6 Full version. It will run virtual scanner, & band scope just fine. It only happens when I try to read from scanner. I have tried different USB ports on my PC. The driver is the one I downloaded from Scannermaster.com where I bought the cable and scanner. I have had the setup for years and never had an issue until now. To my knowledge nothing has changed. All the baudrates match at 57600. I get the best result when I set the com port in the Device Manager baudrate to 9600.

Running Windows 7 64bit custom build PC

 

[kirk5056]

Yes, I am having the same problem. On my 996XT it is both upload and download. My P2s work fine.

 

[KJ4TDM]

I have upped my baud rate on the scanner, com port on software to 115200 it seems to have helped. It still locks up every once in awhile.

 

[KJ4TDM]

Got my issue fixed. Instead of downloading the driver from scannermaaster.com I let windows just install the driver it found online. Everything works now!!