Asheville fire tone out frequency

Status
Not open for further replies.

INDY72

Monitoring since 1982, using radios since 1991.
Premium Subscriber
Joined
Dec 18, 2002
Messages
14,857
Location
Indianapolis, IN
To catch the tones they use, you will have to set the scanner for 5 Tone configuration, not sure if they do that automatically or not, and have it for Tone Out Search. I am not sure if Weaverville is toned out by Buncombe EOC, or does direct dispatching, or both. Been a few years since I was up in the area. ** The 2 Tones in the wiki must be the EOC tone out ones,.. Every other data says they are 5 tone.... Once they get paged out we will know lol**
 

trumpetman

Member
Database Admin
Joined
Mar 24, 2007
Messages
1,883
Location
Charlotte, NC
Weaverville is using two tone and has been for a long time....not sure where you got your 5 tone info from.

I also wonder where you keep referencing the conventional 800 repeaters for Asheville...there do not use them for tone out and never have. The talk-around channel was once a direct NPSPAC channel but now a simplex frequency around 851 MHz that I don't recall right off the top of my head.

My guess for station alerting would be over MOSCAD, it's not done over call alert or two-tone.
 

INDY72

Monitoring since 1982, using radios since 1991.
Premium Subscriber
Joined
Dec 18, 2002
Messages
14,857
Location
Indianapolis, IN
Weaverville is using two tone and has been for a long time....not sure where you got your 5 tone info from.

I also wonder where you keep referencing the conventional 800 repeaters for Asheville...there do not use them for tone out and never have. The talk-around channel was once a direct NPSPAC channel but now a simplex frequency around 851 MHz that I don't recall right off the top of my head.

My guess for station alerting would be over MOSCAD, it's not done over call alert or two-tone.

The wiki states that Weaverville uses 5 Tone. And then it lists 2 Tone. Kinda confusing, so it needs clarified. When I lived in Asheville, Tones were sent out over the 800 MHz repeater when they dispatched. May have just been an single alert tone, but it was definitely an tone. At one point they had 4 800 MHz conventional repeater freqs, now they only have 2 licensed. There is not even an license for that 851 MHz one. This was in conjunction to the 4/5 beep alert APD used/uses for announcements on the TRS.
 
Last edited by a moderator:

Jakeportland

Member
Premium Subscriber
Joined
Jul 10, 2012
Messages
1,192
Location
Denver North Carolina
Asheville

Frequency License Type Tone Alpha Tag Description Mode Tag
158.82000 WYU971 RM 151.4 PL AFD-DISP Asheville Fire Dispatch (Patched to TRS) FMN Fire-Tac
851.06250 M 67.0 PL AFD-T/A Asheville Fire Talkaround FMN Fire-Talk
460.46250 WPNP645 RM 051 DPL AVL-HOUSING Asheville Housing Authority FMN Public Works
 

RBMTS

Active Member
Joined
Apr 28, 2002
Messages
1,095
I have a feeling that the WIKI means is that Weaverville is using MOT tone "GROUP" 5. Not that it is a 5 tone paging system. As I remember the specific tones listed actually fall into the "Group 5" tone group. Confusing - you bet !
 

INDY72

Monitoring since 1982, using radios since 1991.
Premium Subscriber
Joined
Dec 18, 2002
Messages
14,857
Location
Indianapolis, IN
WNYE759
856.2625 RM

857.9875 RM

Both are Asheville Fire/Rescue. One is located on Peach Knob, other on Flat Top.
Both used the same DPL last I knew.

Then there is the Mobile Site:

WQOE926
854.9625 RM Very low power.
 
Last edited by a moderator:

INDY72

Monitoring since 1982, using radios since 1991.
Premium Subscriber
Joined
Dec 18, 2002
Messages
14,857
Location
Indianapolis, IN
Yes, the repeaters on the mountain tops are high power, the mobile one is only like 6 watts for on scene comms.
 
Status
Not open for further replies.
Top