Anytone DMR Programmin Issue

[fantasma25]

I am trying to see if anyone can take a look at the attached pictures and provide suggestions. I recently received an anytone678, I tried to program one of the DMR frequencies for a local mall. I am able to hear the security department (I placed the radio in promiscuous mode), however , I am not able to transmit. Before anyone says anything, yes, I do have authorization to transmit on that frequency for that business. I've tried different combinations but still am only able to receive. This is my first time trying to program a DMR system.

Thank you very much in advance!

 

[WA0CBW]

Did you create a contact list for the two talk groups?

 

[alcahuete]

Unless "Contact 1" is talkgroup 301, it isn't going to work. Like WA0CBW said, you need to have the talkgroups configured. That is probably also why you have to radio in promiscuous mode to hear. You shouldn't have to.

 

[ladn]

You should also set your Radio ID to something consistent with the way other radios on the system are ID's. "My Radio" is going to look pretty odd.

 

[fantasma25]

Did you create a contact list for the two talk groups?

Did that and it seems to be working fine now, thanks!