DMR .wav/.mp3 recording files for DSD

[Saqib]

I need IQ Recorded files of DMR for testing. I've searched on Google but didn't find much files, i've got only 3 files which are working correctly.
i want to test more files on DSD to complete my project.
your presence will be appreciated.

 

[Forts]

You can't make your own recordings?

 

[Saqib]

You can't make your own recordings?

No i'm unable to do that, i tried to record from AirSPY by using RTL-SDR, Dongle, but unable to record correct file, so if you can help me i'll appreciate that.
i need files for testing purpose only.

 

[dave3825]

Are you using DSD or DSDPlus? If Plus, why cant you use FMP24 and hit R to create IQ recordings??

 

[Saqib]

I tried but it gives error, even i have the libfftw3f-3.dll file,

Are you using DSD or DSDPlus? If Plus, why cant you use FMP24 and hit R to create IQ recordings??

 

[mtindor]

I tried but it gives error, even i have the libfftw3f-3.dll file,
View attachment 193617

STOP using DSDPlus 1.01.

THere is a new update on DSDPlus – Digital Decoder . This update is a significant update as it includes all of the changes of the Fast Lane version over the last ten years. It was just released within the past seven days.

 

[Saqib]

w

STOP using DSDPlus 1.01.

THere is a new update on DSDPlus – Digital Decoder . This update is a significant update as it includes all of the changes of the Fast Lane version over the last ten years. It was just released within the past seven days.

when i clicked on Check for Update it showed me this.

 

[mtindor]

So you installed the latest version over top your original 1.01 version (I see your directory name references 1.01). You should install the neweset release in a separate folder all by itself.

But, if you ARE running DSDPlus v 2.547 Public Release, you should also go to:

MISC --> enable Test Base Files at startup.
MISC --> Test Base File now
MISC --> Download Newest Base Files

Extract those basefiles to a new directory. Find the libfftw3f-3.dll and copy it into your working DSDPlus 2.547 Public Release installation

NOTE: The download of the latest public release contains everything you need. If you install it into a fresh directory, you should be fine.

Mike

 

[Saqib]

So you installed the latest version over top your original 1.01 version (I see your directory name references 1.01). You should install the neweset release in a separate folder all by itself.

But, if you ARE running DSDPlus v 2.547 Public Release, you should also go to:

MISC --> enable Test Base Files at startup.
MISC --> Test Base File now
MISC --> Download Newest Base Files

Extract those basefiles to a new directory. Find the libfftw3f-3.dll and copy it into your working DSDPlus 2.547 Public Release installation

NOTE: The download of the latest public release contains everything you need. If you install it into a fresh directory, you should be fine.

Mike

I think its good now?? now i just need to connect RTL-SDR?

 

[mtindor]

I think its good now?? now i just need to connect RTL-SDR?
View attachment 193619

yes, it cannot find any RTL-SDR dongles to connect to. If you do have an RTL-SDR connected, you probably need to run Zadig (maybe with admin privileges) and install the WinUSB drivers from Zadig. But you have to do it the right way. There are plenty of wrong ways.

https://unitrunker.com/fga-zadig.html -- describes how to properly install WinUSB drivers.

 

[Saqib]

yes, it cannot find any RTL-SDR dongles to connect to. If you do have an RTL-SDR connected, you probably need to run Zadig (maybe with admin privileges) and install the WinUSB drivers from Zadig. But you have to do it the right way. There are plenty of wrong ways.

https://unitrunker.com/fga-zadig.html -- describes how to properly install WinUSB drivers.

Got it. perhaps it not too much difficult, my teammate has RTL-SDR dongle and he's working on it already, i'll try to do my working now. well, Thank you so much for your time.