DSDPlus DSDPlus 2.444 available

[dave3825]

on the CC isn't correct should be something like this
this is a example
Con+, 115, 14, 5, 454.44375, 0.0, 0 ; DCC=14

Not seeing it saying it needs an equal sign, semicolon or the letters DCC.

; line format:
;
; protocol, networkID, siteNumber, OTAchannelNumber, TXfrequency, RXfrequency, sortOrder, DCC

What I have seems to work without issue.

 

[bravo14]

Hmmm

In the freqs file I have been using, and not updated since they added DCC, it says this,

View attachment 151782


In the freqs file that is the newest base files just downloaded , it says,

View attachment 151783


No mention of DCC at all.



In any event, back to the DCC format, not seeing it saying it needs an equal sign, semicolon or the letters DCC.


View attachment 151784

What I have seems to work without issue.

View attachment 151785View attachment 151786

I'll try without ; dcc= I took all that left the number and gave a error. I put ; and a number in and the error went away

 

[mtindor]

on the CC isn't correct should be something like this
this is a example
Con+, 115, 14, 5, 454.44375, 0.0, 0 ; DCC=14

Pretty sure that anything after a ; is simply a comment. Can probably put ; three blind mice and it would work

m

 

[dave3825]

Seeing an issue that I don't recall seeing before. I am struggling to stay connected to a distant trunked system. Seems every time it finds the cc again, it creates duplicate files. I am and have been running DSDPLus out of Onedrive for a few years. Just don't recall it doing this.

 

[dave3825]

@bravo14 yes, try without

DSD+ 2.324

Added DMR system disambiguation via DCC support in the DSDPlus.frequencies file.

This feature is primarily designed for Cap+ systems where sites share common frequencies.
DCC values can be appended to DMR channel entries in the DSDPlus.frequencies file.

Example:

Cap+, 1234, 3, 1, 454.7625, 0.0, 0, 12

Cap+, 1234, 7, 1, 454.7625, 0.0, 0, 14


If FMPx is manually tuned to 454.7625 and DSD+ detects a Cap+ datastream,
DSD+ will use the received digital color code to determine whether site 3
or site 7 is being monitored.

A DCC does not need to be added to a DMR frequency entry unless disambiguation is required.

You should edit the comment at the top of the DSDPlus.frequencies file
to reflect the new optional DCC field:

Old: ; protocol, network ID, site number, ... sort order

New: ; protocol, network ID, site number, ... sort order [, DCC]

R I F, for sure

 

[bravo14]

Con+, 115, 14, 5, 454.44375, 0.0, 0 ; DCC=14
as soon I take away ; DCC= just leaving 14 it gives a error. If I put ; 14 error goes away.

 

[dave3825]

Con+, 115, 14, 5, 454.44375, 0.0, 0 ; DCC=14
as soon I take away ; DCC= just leaving 14 it gives a error. If I put ; 14 error goes away.

try this,

Con+, 115, 14, 5, 454.44375, 0.0, 0, 14

 

[bravo14]

try this,

Con+, 115, 14, 5, 454.44375, 0.0, 0, 14

I did a few dmr and cap+ system as a test it works that way no error. Soon I put 0, 13 for NXDN error pops up. Guessing only for dmr/cap+/con+ with 0, than number

 

[mtindor]

Con+, 115, 14, 5, 454.44375, 0.0, 0 ; DCC=14
as soon I take away ; DCC= just leaving 14 it gives a error. If I put ; 14 error goes away.

Not sure what to tell ya. This works fine for me:

Con+,145,13,1,454.300,459.300,1,12
Con+,145,13,2,454.300,459.300,2,12
Con+,145,13,3,451.225,456.225,3 ; DCC=
Con+,145,13,4,451.225,456.225,4 ; DCC=
Con+,145,13,5,451.775,456.775,5 ; DCC=12
Con+,145,13,6,451.775,456.775,6 ; DCC=12
Con+,145,13,7,451.375,456.375,7 ; caca
Con+,145,13,8,451.375,456.375,8 ; caca

No errors on startup. Site trunks just fine. Notice the different values I have for that site.

 

[mtindor]

I did a few dmr and cap+ system as a test it works that way no error. Soon I put 0, 13 for NXDN error pops up. Guessing only for dmr/cap+/con+ with 0, than number

Probably so since DMR is the only one that has a color code (DCC)

 

[KevinC]

Probably so since DMR is the only one that has a color code (DCC)

I "believe" Phase 2 uses color codes as well.

 

[mtindor]

I "believe" Phase 2 uses color codes as well.

Phase 2 P25? I don't think so. Those would be NACs if anything.

 

[KevinC]

Phase 2 P25? I don't think so. Those would be NACs if anything.

Ok. I don't argue so I'm done, but I'm 99.999% sure P2 P25 uses color codes.

 

[dave3825]

I did a few dmr and cap+ system as a test it works that way no error. Soon I put 0, 13 for NXDN error pops up. Guessing only for dmr/cap+/con+ with 0, than number

Yes, only DCC was added. Ran has not been added tmk.

 

[merlin]

I have never had a crash, but just now on startup I have this:

 

[dave3825]

What's up with the 2 files mentioned? Pic cut off on right side.

 

[merlin]

If there is red text and it indicates issues with network, sites, or freq files, they changed the way those files are read so anything not within the formatting rules in the top of those files will trigger that.


I used to put cc (control channel) after entries in the freqs file after the color code spot.


So this,

View attachment 151780


will now trigger this,


View attachment 151779

I presume an entry without a comma will trigger that.

 

[merlin]

What's up with the 2 files mentioned? Pic cut off on right side.

Window size is too narrow and no word wrap.

 

[dave3825]

Window size is too narrow and no word wrap.

 

[pro92b]

I think you have two files missing. In the console window scroll up to the top and it should list what files have problems.