• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Error 2

Status
Not open for further replies.

emti85

Member
Joined
May 31, 2010
Messages
2
Location
Ohio
I am having an Error 2 show up on my LCD of my 354 it programmed fine before and worked i went back a few days later and made some changes now when i download it error 2 and locks the radio up help please i am running windows 7

Thanks
 

LZJSR

Member
Premium Subscriber
Joined
Mar 5, 2003
Messages
546
Location
California
This happened to me last week with my VX924...it happened when the programming cable became disconnected during the upload of new channels. I had to turn off the radio, then reprogram the radio with the default file (click new) in the programming software, then after it was fixed, i reprogrammed the radio with the last safe/known file that I had saved.
 

acsdr1911

Member
Joined
Jun 16, 2010
Messages
2
I'm having the same problem and doing a "new" file and then re programing doesn't work. I keep getting a communications error when downloading to the radio.
 
Status
Not open for further replies.
Top