-
To anyone looking to acquire commercial radio programming software:
Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.
If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.
To obtain Motorola software see the Sticky in the Motorola forum.
The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.
For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).
This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.
Hytra MD785i automatically power on ?
- Thread starter libya
- Start date
Muxlow
Super Secret
Yes
Need to use a DB26 connector on the back of the radio and add a wire for ignition.
Then set the radio to IGNITION ONLY so will only turn on once it gets a power source
The HM series radios do this automatically when it gets power to the main power cables.
Need to use a DB26 connector on the back of the radio and add a wire for ignition.
Then set the radio to IGNITION ONLY so will only turn on once it gets a power source
The HM series radios do this automatically when it gets power to the main power cables.
Audio recording from HM782
I wanted to get advice on how to record audio externally, not on the SD Card, from an HM782. There is the accessory connector on the back. What is the pinout and what pins have the audio? Once I know, I suppose I can make a cable that has a 3.5mm connector on the other side that I can connect to...
the Green wire in my picture, Pin 26 on the DB26 connector is Ign sense.
