• To anyone looking to acquire commercial radio programming software:

    Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. All requests will be deleted and a forum infraction issued. Making a request such as this is attempting to engage in software piracy and this forum cannot be involved or associated with this activity. The same goes for any private transaction via Private Message. Even if you attempt to engage in this activity in PM's we will still enforce the forum rules. Your PM's are not private and the administration has the right to read them if there's a hint to criminal activity.

    If you are having trouble legally obtaining software please state so. We do not want any hurt feelings when your vague post is mistaken for a free request. It is YOUR responsibility to properly word your request.

    To obtain Motorola software see the Sticky in the Motorola forum.

    The various other vendors often permit their dealers to sell the software online (i.e., Kenwood). Please use Google or some other search engine to find a dealer that sells the software. Typically each series or individual radio requires its own software package. Often the Kenwood software is less than $100 so don't be a cheapskate; just purchase it.

    For M/A Com/Harris/GE, etc: there are two software packages that program all current and past radios. One package is for conventional programming and the other for trunked programming. The trunked package is in upwards of $2,500. The conventional package is more reasonable though is still several hundred dollars. The benefit is you do not need multiple versions for each radio (unlike Motorola).

    This is a large and very visible forum. We cannot jeopardize the ability to provide the RadioReference services by allowing this activity to occur. Please respect this.

Local MURS Activity

MiCon

Mike
Joined
Feb 9, 2006
Messages
257
Reaction score
318
Location
central AZ
Getting back to the original OP, I hear local traffic on all of the MURS frequencies. Everything from kids using them as toys, to Walmart & other businesses, to a local 'net' of nightly users.
 

redbeard

OH, PA, WV Regional Admin
Database Admin
Joined
Feb 5, 2003
Messages
1,510
Reaction score
1,124
Location
BEE00.348-3.1
Here in SE PA PennDot (PA DEPT Transportation) uses several MURS freqs in P25 NAC100 mode.
I forgot about that but yes and that's illegal as :poop: too...

How so? They aren't licensed for the frequencies. The radios are not type accepted for MURS operation. The radios are in most cases grossly over allowed power limits.

There's no waiver for public safety to do whatever the hell they want, whether you are the state police or not. Even NIFOG frequencies have to be licensed in some cases.
 
Last edited:

redbeard

OH, PA, WV Regional Admin
Database Admin
Joined
Feb 5, 2003
Messages
1,510
Reaction score
1,124
Location
BEE00.348-3.1
I forgot about that but yes and that's illegal as :poop: too...

How so? They aren't licensed for the frequencies. The radios are not type accepted for MURS operation. The radios are in most cases grossly over allowed power limits.

There's no waiver for public safety to do whatever the hell they want, whether you are the state police or not. Even NIFOG frequencies have to be licensed in some cases.
OT but they also have a tower site near Washington, PA IIRC that has been on the wrong licensed frequency since it was turned up.
 

KK4JUG

Member
Premium Subscriber
Joined
Dec 13, 2014
Messages
4,618
Reaction score
3,337
Location
GA
Until a couple of years ago, the local Red Cross was still using 47.42 MHz for some of their communications. I haven't listened to them in quite a while, though.
 

n3obl

ØAES-1024
Database Admin
Joined
Dec 19, 2002
Messages
2,282
Reaction score
1,551
Location
PA
Until a couple of years ago, the local Red Cross was still using 47.42 MHz for some of their communications. I haven't listened to them in quite a while, though.
And what does 47.42 have to do with MURS?
 

KK4JUG

Member
Premium Subscriber
Joined
Dec 13, 2014
Messages
4,618
Reaction score
3,337
Location
GA
And what does 47.42 have to do with MURS?
Take the time to read the earlier threads. The gist of some of them was that the use of those low band FM freqs seem to be fading into oblivion. I was noting that some people were using them longer than others. My comment made reference to previous mentions of low band FM.
 

kc2asb

Member
Joined
Dec 31, 2015
Messages
2,161
Reaction score
3,396
Location
NYC Area
Until a couple of years ago, the local Red Cross was still using 47.42 MHz for some of their communications. I haven't listened to them in quite a while, though.
I just searched "Red Cross" in the database and checked my local (NJ) and 47,42 is still listed as a the nationwide primary. This section has not been updated since 2016, though. I haven't monitored the Red Cross in years.

Sorry for the thread drift - back to the topic at hand


American National Red Cross​




The American Red Cross is the nation's premier emergency response organization that offers humanitarian care to the victims of devastating natural disasters.

FrequencyLicenseTypeToneAlpha TagDescriptionModeTag
47.420WXK625BMCSQNJARC 01Red (Nationwide Primary)FMEmergency Ops
47.500BMCSQNJARC 02Black (Nationwide Secondary)FMEmergency Ops
47.460WXK625BMCSQNJARC 03Tan (Alternate)FMEmergency Ops
47.660BMCSQNJARC 04Yellow (Backup)FMEmergency Ops
47.540WXK625BMCSQNJARC 05Orange (Tactical)FMEmergency Ops
47.620BMCSQNJARC 06Blue (Tactical)FMEmergency Ops
47.580BMCSQNJARC 07Purple (Tactical)FMEmergency Ops
 

AK9R

Lead Wiki Manager and almost an Awesome Moderator
Staff member
Super Moderator
Joined
Jul 18, 2004
Messages
10,948
Reaction score
10,314
Location
Central Indiana
Given that this is a thread about local MURS activity, what the Red Cross, or anyone, might be doing on low-band VHF is probably off topic for the thread.
 

kc2asb

Member
Joined
Dec 31, 2015
Messages
2,161
Reaction score
3,396
Location
NYC Area
On the topic of MURS....when I first learned of the existence of the service, I set out to find equipment to try operating there. Later, Radio Shack was closing out their #19-1210 2 channel mobile and BTX-127 2 channel HT. They were very cheap, and can be set to any of the MURS frequencies and any CTCSS tone. "Programming" a frequency is accomplished via six internal dip switches and is a bit clunky.

I had intended to use them as a cheap means of local communications with home, but as cellphones became cheaper, I didn't see the need for a MURS setup. I did use the mobile as a dedicated monitor on 154.600 for a while, though. As a result, they have been sitting in their boxes on a shelf for years. :)

Noted that @kb3ouk is using MURS on his farm. Anyone else actually operating on MURS? If anyone is local to me (NYC area) I'd love to dust off my Radio Shack equipment and get on the air. LOL

(image courtesy of Ebay)

s-l500-1056195360.jpg
 

spongella

Member
Premium Subscriber
Joined
Feb 21, 2014
Messages
1,204
Reaction score
733
Location
N2HUN, Western NJ
On the topic of MURS....when I first learned of the existence of the service, I set out to find equipment to try operating there. Later, Radio Shack was closing out their #19-1210 2 channel mobile and BTX-127 2 channel HT. They were very cheap, and can be set to any of the MURS frequencies and any CTCSS tone. "Programming" a frequency is accomplished via six internal dip switches and is a bit clunky.

I had intended to use them as a cheap means of local communications with home, but as cellphones became cheaper, I didn't see the need for a MURS setup. I did use the mobile as a dedicated monitor on 154.600 for a while, though. As a result, they have been sitting in their boxes on a shelf for years. :)

Noted that @kb3ouk is using MURS on his farm. Anyone else actually operating on MURS? If anyone is local to me (NYC area) I'd love to dust off my Radio Shack equipment and get on the air. LOL

(image courtesy of Ebay)

View attachment 196505
Thanks OM. Will set up my Airspy HF + Discovery on 154.6 MHz during business hours to see what comes up.
 

kc2asb

Member
Joined
Dec 31, 2015
Messages
2,161
Reaction score
3,396
Location
NYC Area
Got a hit on 151.625 this morning, but the transmission was too brief to get any ID. This is the first time in a long while since I've heard anything on the 151 MHz MURS channels.

Thanks OM. Will set up my Airspy HF + Discovery on 154.6 MHz during business hours to see what comes up.
Sounds good - looking forward to your reports! I've been hearing what sounds like rail yard workers here in Hudson County, NJ.
 

kc2asb

Member
Joined
Dec 31, 2015
Messages
2,161
Reaction score
3,396
Location
NYC Area
151.625 isn't a MURS channel
Just double-checked, and you're right. My mistake. I have my BCT-15X in service search for FRS/GMRS/MURS and 151.625 is in the "pool" of frequencies it's searching through. Since I bought the 15X used, perhaps the previous owner added it.
 

EAFrizzle

Bond. Ward Bond
Premium Subscriber
Joined
Jun 2, 2019
Messages
1,154
Reaction score
1,668
Location
SE de DFW
I put .570 and .600 in the dual-bander this morning, and I keep getting static-y squelch breaks on .570. I'm pretty rural here, so it could be from anywhere.

Im kind of surprised that there aren't folks around here using MURS channels on 20-25 watt mobiles.
 

spongella

Member
Premium Subscriber
Joined
Feb 21, 2014
Messages
1,204
Reaction score
733
Location
N2HUN, Western NJ
The squawking sounds are probably Dakota drive way alarms. They are way to freaking popular in LA!
A few years back I was receiving these robo-voice comms announcing some kind of sector alert. Turned out to be DakotaAlert systems.
 
Top