On National Interoperability I have the Mode on Auto should it be on that one or something different?
| Frequency | License | Type | Tone | Alpha Tag | Description | Mode | Tag |
|---|---|---|---|---|---|---|---|
| 769.13125 | RM | 293 NAC | 7AG58/58D | Air - Ground 58/58D | P25 | Interop | |
| 769.63125 | RM | 293 NAC | 7AG60/60D | Air - Ground 60/60D | P25 | Interop | |
| 770.13125 | RM | 293 NAC | 7AG67/67D | Air - Ground 67/67D | P25 | Interop | |
| 770.63125 | RM | 293 NAC | 7AG68/68D | Air - Ground 68/68D | P25 | Interop | |
| 773.11875 | RM | 293 NAC | 7AG78/78D | Air - Ground 78/78D | P25 | Interop | |
| 773.61875 | RM | 293 NAC | 7AG80/80D | Air - Ground 80/80D | P25 | Interop | |
| 774.11875 | RM | 293 NAC | 7AG85/85D | Air - Ground 85/85D | P25 | Interop | |
| 774.61875 | RM | 293 NAC | 7AG88/88D | Air - Ground 88/88D (Landing Zone) | P25 | Interop |
| 851.100 | WQTD797 | M | 293 NAC | CO SMPX1 | Statewide Simplex 1 | P25 | Interop |
| 851.750 | WQTD797 | M | 293 NAC | CO SMPX2 | Statewide Simplex 2 | P25 | Interop |
| 852.300 | WQTD797 | M | 293 NAC | CO SMPX3 | Statewide Simplex 3 | P25 | Interop |
| 852.550 | WQTD797 | M | 293 NAC | CO SMPX4 | Statewide Simplex 4 | P25 | Interop |
| 853.6875 | WQTD797 | M | 293 NAC | CO SMPX5 | Statewide Simplex 5 | P25 | Interop |
| 853.7875 | WQNY612 | RM | 156.7 PL | CO STAC | Statewide Tactical Repeater |
Everything public safety in 700MHz is P25. So to answer your question, you would set it to digital/p25. You don't want auto as that would open squelch on random FM noise that you don't want. YMMV, I am not a GRE guy.scanlist, I'm using Pro-106/Pro-197. I might not hit anything on them, so I will see, I might not hit any of them. Is there any of these freq's that are in Northern Colorado area? Specific bands that I have below.
700 MHz Nationwide Air-Ground
These channels are reserved for air-ground communications to be used by low-altitude aircraft and ground-based stations. Are they just for EMS or would any law enforcement or fire use them. if I don't use Auto do i just leave it blank?
Frequency License Type Tone Alpha Tag Description Mode Tag 769.13125 RM 293 NAC 7AG58/58D Air - Ground 58/58D P25 Interop 769.63125 RM 293 NAC 7AG60/60D Air - Ground 60/60D P25 Interop 770.13125 RM 293 NAC 7AG67/67D Air - Ground 67/67D P25 Interop 770.63125 RM 293 NAC 7AG68/68D Air - Ground 68/68D P25 Interop 773.11875 RM 293 NAC 7AG78/78D Air - Ground 78/78D P25 Interop 773.61875 RM 293 NAC 7AG80/80D Air - Ground 80/80D P25 Interop 774.11875 RM 293 NAC 7AG85/85D Air - Ground 85/85D P25 Interop 774.61875 RM 293 NAC 7AG88/88D Air - Ground 88/88D (Landing Zone) P25 Interop
Actually, there are some low power itinerants defined by the NIFOG that can be analog or digital.Everything public safety in 700MHz is P25. So to answer your question, you would set it to digital/p25. You don't want auto as that would open squelch on random FM noise that you don't want. YMMV, I am not a GRE guy.
As others said though you are unlikely to hear anything unless it were some unlicensed activity, which there is always a chance.
I must have missed those. Thanks, I'll have to give it another look.Actually, there are some low power itinerants defined by the NIFOG that can be analog or digital.