It seems you don't have ffmpeg installed in your TTD folder.
There is a link to download ffmpeg on the TTD website.
Last edited:
TwoToneDetect New TwoToneDetect in the works - Python based
- Thread starter aaknitt
- Start date
-
- Tags
- twotonedetect
There is a link to download ffmpeg on the TTD website.
- Joined
- Mar 27, 2007
- Messages
- 77
Unable to get FTO working Correctly
I'm having a hard time getting TwoTone to send a page on only the FTO of a local fire department. To start off I have uploaded a .zip file of the FTO for additional troubleshooting.
I typically will receive an email with a little radio traffic on it - but its not because the Tone was activated by dispatch. It might have been a key-up or something in that nature. Maybe I'm not processing the 2-tone as the one this department uses so that's why I uploaded a sample.
Tone Editor Settings:
A Tone: 800
B Tone: 1500
A tone Length: .25
B tone Length: .25
TwoToneDetect v68 Settings:
Record Sec: 30
Record Release timeL 3.0
Tone Tolerance: 1.0
Tone Offset: 0.0
I'm having a hard time getting TwoTone to send a page on only the FTO of a local fire department. To start off I have uploaded a .zip file of the FTO for additional troubleshooting.
I typically will receive an email with a little radio traffic on it - but its not because the Tone was activated by dispatch. It might have been a key-up or something in that nature. Maybe I'm not processing the 2-tone as the one this department uses so that's why I uploaded a sample.
Tone Editor Settings:
A Tone: 800
B Tone: 1500
A tone Length: .25
B tone Length: .25
TwoToneDetect v68 Settings:
Record Sec: 30
Record Release timeL 3.0
Tone Tolerance: 1.0
Tone Offset: 0.0
Thanks now i wait, Will this fix the AMR Also?
Yes it will.
That is not a standard TwoTone. It is more of just an alert tone to get your attention. It is going to be quite hard to get TTD to reliably decode that tone. Is there a two tone sequence prior to the warbling alert tone?
TTD works with 200ms audio samples. your tones have a length of 250ms. So you are asking it to decode on one sample of the Atone followed by one sample of the Btone. Yes, you will regularly get false activations by normal radio traffic with this setup.
- Joined
- Mar 27, 2007
- Messages
- 77
I figured that wasn't a standard TwoTone - That alert is the FTO this department uses.No other tones are used when they dispatch.
Last edited:
Still not working
Attachments
You have the ffmpeg.exe file in the same folder as TTD? If so, double click on the ffmpeg.exe file to start it.
Just did that again, Ill post back when a call come through. Ive ran Both As Administrator.
Its still not sending the email.
I would post your log file here so myself and others can see what might be the issue.
I've had this issue myself. I can't remember what I had forgotten to set up to get it to work correctly.
I figured out I had a setup incorrect.
This? https://dl.dropboxusercontent.com/u/46370133/log_2016-02-06_11_36_26_904000.txt
File was to big to attach.
For starters, turn your audio threshold up. Set it manually in the config.cfg file to about 400.
Recived One Call And Email, No AMR.
I think your email setup is the issue. If you are using gmail you will have to set up a app password for the ttd. Then place that password in your setup for ttd.
So, Access for less secure apps?
Similar threads
