North Wildwood PD

Status
Not open for further replies.

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
16,093
Location
BEE00
Getting a report that the PD is no longer operating on 155.640. Can anyone down there confirm that, and if so, any intel as to where they went? I see that they have DMR and NXDN emissions on the license, not that it means anything, sometimes those get added because it doesn't cost anything to do so. Or maybe they migrated to NJICS?
 

mshumeyk

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
309
Location
Southern New Jersey Shore
I am headed down the Cape May on Saturday so if the new channel hasn’t been located by then I will try to find it. NJICS would be most likely, especially if you read the article about the Lightning Strike and the 911 center in my post from Saturday.
 

mshumeyk

Member
Premium Subscriber
Joined
Dec 19, 2002
Messages
309
Location
Southern New Jersey Shore
A simple suggestion I forgot to make is that if your are monitoring North Wildwood at 155.64 with the PL 173.8 enabled try disabling the PL feature or choose "Tone Search" depending on your radio. A number of years ago I heard Wildwood PD have all cars switch to the new channel. I was looking all over the place for their new frequency until l realized they were still on the same frequency and just switched from their PL to their current DPL.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
16,093
Location
BEE00
Has anyone checked the two UHF repeaters they have licensed? 460.3125 and 460.4125
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
16,093
Location
BEE00
Done. As suspected, they moved to the UHF repeaters in DMR mode. If anyone can confirm the TGID and Time Slots in use, please submit that so it can be added to the listings.

Also, keep in mind that DMR is TDMA, so they may have multiple talkgroups and time slot usage on each frequency.
 

GTR8000

NY/NJ Database Guy
Database Admin
Joined
Oct 4, 2007
Messages
16,093
Location
BEE00
You need a scanner or other receiver/device capable of decoding DMR.
 
Status
Not open for further replies.
Top