Hi Guys,
I ‘m running this on rapsberry pi and I ‘ve tried the following and they come up with very similar results. It will run for 1-15 minutes and then start throwing tuning errors. Please help!
Here are the two I‘ve tried so far:
./rx.py -l http:127.0.0.1:8080 --args 'rtl' -N 'LNA:47' -S 960000 -o 25000 -q -2 -d 0 -T trunk.tsv -V -2 -U 2> stderr.log
./rx.py --args 'rtl' -N 'LNA:47' -S 960000 -o 25000 -q -2 -d 0 -T trunk.tsv -V -2 -U 2> stderr.log
I originally thought it was related to too many trunks being listened into but after shrinking it down to a few, I still see this behaviour.
This is my second scanner, I do not recall having those issues on my other OP25 on raspberrypi.
I ‘m running this on rapsberry pi and I ‘ve tried the following and they come up with very similar results. It will run for 1-15 minutes and then start throwing tuning errors. Please help!
Here are the two I‘ve tried so far:
./rx.py -l http:127.0.0.1:8080 --args 'rtl' -N 'LNA:47' -S 960000 -o 25000 -q -2 -d 0 -T trunk.tsv -V -2 -U 2> stderr.log
./rx.py --args 'rtl' -N 'LNA:47' -S 960000 -o 25000 -q -2 -d 0 -T trunk.tsv -V -2 -U 2> stderr.log
I originally thought it was related to too many trunks being listened into but after shrinking it down to a few, I still see this behaviour.
This is my second scanner, I do not recall having those issues on my other OP25 on raspberrypi.
Code:
gr-osmosdr 0.1.4 (0.1.4) gnuradio 3.7.13.4
built-in source types: file osmosdr fcd rtl rtl_tcp uhd miri hackrf bladerf rfspace airspy airspyhf soapy redpitaya freesrp
Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
[R82XX] PLL not locked!
Using two-stage decimator for speed=960000, decim=10/4 if1=96000 if2=24000
Project 25 IMBE Encoder/Decoder Fixed-Point implementation
Developed by Pavel Yazev E-mail: pyazev@gmail.com
Version 1.0 (c) Copyright 2009
This program comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to redistribute it
under certain conditions; see the file ``LICENSE'' for details.
op25_audio::eek:pen_socket(): enabled udp host(127.0.0.1), wireshark(23456), audio(23456)
p25_frame_assembler_impl: do_imbe[1], do_output[0], do_audio_output[1], do_phase2_tdma[1], do_nocrypt[0]
Reading whitelist file
metadata update not enabled
audio device: default
Allocating 15 zero-copy buffers
Allocating 15 zero-copy buffers
Allocating 15 zero-copy buffers
p25_framer::rx_sym() tuning error -1200
p25_framer::rx_sym() tuning error -1200
p25_framer::rx_sym() tuning error -1200
Last edited: