P-25 Motorola XTS 3000 Model 3-Hotspot will not hear Radio

[VA4JOE]

Hi there, I have a Motorola XTS 3000 Version 3 P25 radio that I want to use with a hotspot. I have programmed the radio with my DMR ID in the Astro section of the codeplug. I have programmed several talkgroups/reflectors into the radio. I am running WPSD on the hotspot. My problem is the hotspot will not hear the radio for transmitting. It will receive audio from reflectors/talkgroups. When I tried to use the MMDVM calibration tool, and I press the PTT nothing shows up on the screen. I have gone +/-500 and still nothing shows up on the screen.

I know the radio is transmitting both digital and analogue signals because I can hear them on my other radios. I have also tried changing TX, RX, and PTT inversion settings in the advanced section of the hotspot configuration screen. Nothing seems to be getting it to work. Does anyone have some insight on how to get it to work?

P.S. I have also put matching NAC's in both the radio and the hotspot.

 

[VA4JOE]

PS. My DMR and YSF radios can be heard by the hotspot.

 

[VA4JOE]

UPDATE: SOLVED:
I got it to work now. I had tuned the radio with an RTL-SDR and the tuning software. I reverted the tuning I did and then was able to use the MMDVM calibrating tool to change the offset and get P25 to work both transmit and receive.