I love the way GRE changed how using priority with a Motorola trunked system works in one of the recent upgrades. Apparently the priority function is now decoding the subaudible data that accompanies each voice transmission and looks for active priority talkgroups in that data. I am monitoring a large multi agency Moto type II 800 MHz system. I have the main dispatch talkgroups and SWAT talkgroups for each agency as well as the fireground talkgroups all set for priority. Now when the scanner is stopped on a lic. plate running channel or talk channel or whatever the scanner will interrupt them in mid sentence and immediately jump to the main dispatch channel when a call is dispatched. I used to lock out the talk and info channels and others when the system was busy or put them in favorites, but not any more. Now I can scan everything and not miss the calls being dispatched. I have the priority interval set at the lowest setting it would allow, .2 seconds. I also have "priority interrupts talkgroup" set to yes. Thanks GRE, I love it this way. Please incorporate this type of trunking priority into your future models. The only thing I would change is allowing the scanner to check priority talkgroups even when in Manual hold or pause. I tried doing it this way when I first got the scanner but priority would not work with the system I monitor. In one of the recent upgrades I saw the notes about improvements in the way priority works with trunked systems. I gave it a try tonight and it ROCKS!