Pro-668 error code 3-03
- Thread starter KyleK911
- Start date
- Status
DJ11DLN
Member
You can use the "prepare card" option in E-Z Scan (iScan if you haven't legacy-upgraded your 668 to WS-1080 spec) or you can use a free app called SDFormatter. But do yourself a favor and get another card and keep it programmed. Sometimes when the card goes haywire and throws these codes, it's the beginning of the end for it. The spare cards are cheap insurance to have with you so you can get your scanner working again the next time it happens. And it almost certainly will happen again.
Hook it up to iscan/EZ Scan and go to the Scanner/SD Card tab at the very top and select Prepare Scanner Memory/SD Card for use. Format it there. If the issue continues you will need to replace the SD card.
If you have not gotten the Legacy Upgrade from Whistler, to turn the PRO668 into a WS1080, I urge you to do so, it improves reception, battery life and makes updating the library a lot easier.
whistlergroup.com
If you have not gotten the Legacy Upgrade from Whistler, to turn the PRO668 into a WS1080, I urge you to do so, it improves reception, battery life and makes updating the library a lot easier.
Upgrade Your Pro-18, Pro-668 or PSR-800 Scanner
PLEASE READ THE INSTRUCTIONS BELOW BEFORE COMPLETING YOUR PURCHASE This upgrade is available for the following scanners ONLY: Pro-18 Pro-668 PSR-800 Units free of operational defects will be upgraded to the authorized Whistler DMR - $69.99 Units operating with unauthorized firmware will be...
whistlergroup.com
Yes the same USB cable used to program the scanner, the same software you use to program the scanner
One of these. Could be any USB-A to Mini-B cable, doesn't have to be the one that came with the scanner
tvengr
Well Known Member
From Radio Reference Wiki:
| 03-03 | Error reading MicroSD card | Reinsert the MicroSD card to ensure it is fully inserted in locked in the MicroSD slot. If necessary, reformat the MicroSD card using the PC Application “Prepare SD Card for use” option. Replace the MicroSD card if the problem persists. |
DJ11DLN
Member
If you want to format and program the card a lot easier in the future get an adapter that plugs into a USB port. They're fairly cheap. You will also be able to use it to easily move pictures from a camera card to your computer. My current one is a Warrky that will accept SD, MicroSD, and something else. It also functions as a 3-port hub. I can't recall what I paid but it wasn't awful, surely not more than $25-$30. Formatting/preparing and loading up the cards goes much faster this way than using the cable with the card in the scanner.
- Joined
- Feb 18, 2016
- Messages
- 1,955
You should be able to program the scanner without updating the library via iscan software.....However I strongly recommend you Send it in to whistler for the legacy upgrade then you get your 668 upgraded to a WS1080 and ezscan software. other then that search this site for how to manually update the library.
- Status
