Pro 95 Audio problems

tx2654 · Dec 30, 2006

My Pro95 is programmed for EDACS trunked police systems. I see the freq displayed on the screen when there is radio traffic, but theres no audio. Any idea why the scanner is receiving the signal, but no audio? I even tried to plug in external speakers, and still no audio.

Dubbin · Dec 30, 2006

Did you happen to start programming the frequencies in the 0 channel spot? If so that is a no no with an EDACS system. You need to start in channel 1.

tx2654 · Dec 30, 2006

Dubbin said:
Did you happen to start programming the frequencies in the 0 channel spot? If so that is a no no with an EDACS system. You need to start in channel 1.

OH HELL! I will try that, I think I did. I'm using the free software win95 to program...

tx2654 · Dec 30, 2006

Even after moving that freq off that channel bank, it still doing it however it is picking up more conversation.

I will have to make sure I have all the right freq. put in.

Thanks for the tip. I'll let ya know if I still have trouble. I still don't see why it is showing activity on the screen, but no audio.

SouthSoundScanner · Dec 30, 2006

What system are you trying to monitor?

DickH · Dec 30, 2006

tx2654 said:
Even after moving that freq off that channel bank, it still doing it however it is picking up more conversation.

I will have to make sure I have all the right freq. put in.

Thanks for the tip. I'll let ya know if I still have trouble. I still don't see why it is showing activity on the screen, but no audio.

You need the correct LCN. That's the Logical Channel Number. Some systems don't use sequential channels. They might use CH.1,4,8,9,10,18 &20. You MUST put them in those exact channels in the scanner.

tx2654 · Dec 30, 2006

DickH said:
You need the correct LCN. That's the Logical Channel Number. Some systems don't use sequential channels. They might use CH.1,4,8,9,10,18 &20. You MUST put them in those exact channels in the scanner.

OK I will have to find out what that is.

tx2654 · Dec 30, 2006

KC9GLG said:
What system are you trying to monitor?

It's a Police EDAC's system. They use the LPE200 ericsson radios.

It also may be that I dont have my scanner programmed correct. There was a section for talk groups, what I have no idea how to set.

Dubbin · Dec 30, 2006

tx2654 said:
It's a Police EDAC's system. They use the LPE200 ericsson radios.

It also may be that I dont have my scanner programmed correct. There was a section for talk groups, what I have no idea how to set.

tx, what city and state do you live in or post a link to the system you are trying to program.

tx2654 · Dec 30, 2006

Dubbin said:
tx, what city and state do you live in or post a link to the system you are trying to program.

Monitoring this one here :

http://www.radioreference.com/modules.php?name=RR&sid=2345

Dubbin · Dec 30, 2006

OK now tell us what channel numbers you have each frequency programmed into. Also have you programmed in any of the talkgroup ID's like the first one listed (02-025).

tx2654 · Dec 30, 2006

Dubbin said:
OK now tell us what channel numbers you have each frequency programmed into. Also have you programmed in any of the talkgroup ID's like the first one listed (02-025).

011 Live Oak 01 866.32500 02 866.82500* 03 867.58750 04 N/A 05 868.11250 06 N/A 07 868.56250
08 N/A 09 868.78750

These are not the freq's that I put in?

Dubbin · Dec 30, 2006

tx2654 said:
011 Live Oak 01 866.32500 02 866.82500* 03 867.58750 04 N/A 05 868.11250 06 N/A 07 868.56250
08 N/A 09 868.78750

These are not the freq's that I put in?

Well what freq's did you put in and where did you get them from?

tx2654 · Dec 30, 2006

Bank 2 Ch 00 0.00000 EDACS
LOPD 866.82500 EDACS
LOPD 821.51250 EDACS
LOPD 821.82500 EDACS
LOPD 822.01250 EDACS
LOPD 822.51250 EDACS
LOPD 822.58750 EDACS
LOPD 822.88750 EDACS
LOPD 823.01250 EDACS
LOPD 823.11250 EDACS
LOPD 823.33750 EDACS
LOPD 823.56250 EDACS
LOPD 823.67500 EDACS
LOPD 823.78750 EDACS
LOPD 823.91250 EDACS
LOPD 866.01250 EDACS
LOPD 866.32500 EDACS
LOPD 866.51250 EDACS
LOPD 821.32500 EDACS
LOPD 867.01250 EDACS
LOPD 867.51250 EDACS
LOPD 867.58750 EDACS
LOPD 867.88750 EDACS
LOPD 868.01250 EDACS
LOPD 868.11250 EDACS
LOPD 868.33750 EDACS
LOPD 868.56250 EDACS
LOPD 821.01250 EDACS
LOPD 868.67500 EDACS
LOPD 868.78750 EDACS
LOPD 868.91250 EDACS
-------------------------------------------------------------
lopd 866.32500 EDACS
LOPD 866.82500 EDACS
Bank 3 Ch 02 867.58750 EDACS
Bank 3 Ch 03 0.00000 FM
Bank 3 Ch 04 868.11250 EDACS
Bank 3 Ch 05 0.00000 FM
Bank 3 Ch 06 868.56250 EDACS
Bank 3 Ch 07 0.00000 FM
Bank 3 Ch 08 868.78750 EDACS
Bank 3 Ch 09 0.00000 FM
Bank 3 Ch 10 0.00000 FM
Bank 3 Ch 11 0.00000 FM
Bank 3 Ch 12 0.00000 FM
Bank 3 Ch 13 0.00000 FM
Bank 3 Ch 14 0.00000 FM
Bank 3 Ch 15 0.00000 FM
Bank 3 Ch 16 0.00000 FM
Bank 3 Ch 17 0.00000 FM
Bank 3 Ch 18 0.00000 FM
Bank 3 Ch 19 0.00000 FM
Bank 3 Ch 20 0.00000 FM
Bank 3 Ch 21 0.00000 FM
Bank 3 Ch 22 0.00000 FM
Bank 3 Ch 23 0.00000 FM
Bank 3 Ch 24 0.00000 FM
Bank 3 Ch 25 0.00000 FM
Bank 3 Ch 26 0.00000 FM
Bank 3 Ch 27 0.00000 FM
Bank 3 Ch 28 0.00000 FM
Bank 3 Ch 29 0.00000 FM
Bank 3 Ch 30 0.00000 FM
-------------------------------------------------------------
lopd 0.00000 EDACS
LOPD 866.32500 EDACS
Bank 4 Ch 02 866.82500 EDACS
Bank 4 Ch 03 867.58750 EDACS
Bank 4 Ch 04 0.00000 EDACS
Bank 4 Ch 05 868.11250 EDACS
Bank 4 Ch 06 0.00000 EDACS
Bank 4 Ch 07 868.56250 EDACS
Bank 4 Ch 08 0.00000 EDACS
Bank 4 Ch 09 868.78750 EDACS
Bank 4 Ch 10 0.00000 FM
Bank 4 Ch 11 0.00000 FM
Bank 4 Ch 12 0.00000 FM
Bank 4 Ch 13 0.00000 FM
Bank 4 Ch 14 0.00000 FM
Bank 4 Ch 15 0.00000 FM
Bank 4 Ch 16 0.00000 FM
Bank 4 Ch 17 0.00000 FM
Bank 4 Ch 18 0.00000 FM
Bank 4 Ch 19 0.00000 FM
Bank 4 Ch 20 0.00000 FM
Bank 4 Ch 21 0.00000 FM
Bank 4 Ch 22 0.00000 FM
Bank 4 Ch 23 0.00000 FM
Bank 4 Ch 24 0.00000 FM
Bank 4 Ch 25 0.00000 FM
Bank 4 Ch 26 0.00000 FM
Bank 4 Ch 27 0.00000 FM
Bank 4 Ch 28 0.00000 FM
Bank 4 Ch 29 0.00000 FM
Bank 4 Ch 30 0.00000 FM
-----------------------------------------------------------

Now, once I put in the FREQ in Bank four, in that order, I'm getting correct scanning of the system, at least so far. I guess bank 4 is how it should be entered???

tx2654 · Dec 30, 2006

tx2654 said:
011 Live Oak 01 866.32500 02 866.82500* 03 867.58750 04 N/A 05 868.11250 06 N/A 07 868.56250
08 N/A 09 868.78750

These are not the freq's that I put in?

Here. The extra FREQ. I have listed are from someone I know there.

http://www.radioreference.com/module...me=RR&sid=2345

Dubbin · Dec 30, 2006

tx2654 said:
Now, once I put in the FREQ in Bank four, in that order, I'm getting correct scanning of the system, at least so far. I guess bank 4 is how it should be entered???

Yes bank 4 is how it should be. I have no idea what you have going on in bank 2 and 3.

tx2654 · Dec 30, 2006

Dubbin said:
Yes bank 4 is how it should be. I have no idea what you have going on in bank 2 and 3.

OK seems to be working too. Thanks for the help guys!

Dubbin · Dec 30, 2006

Pro 95 Audio problems

tx2654

Member

Dubbin

Member

tx2654

Member

tx2654

Member

SouthSoundScanner

Member

DickH

Member

tx2654

Member

tx2654

Member

Dubbin

Member

tx2654

Member

Dubbin

Member

tx2654

Member

Dubbin

Member

tx2654

Member

tx2654

Member

Dubbin

Member

tx2654

Member

Dubbin

Member

Similar threads